Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re: Ignition upgrade

From: RobertB
Email: rob<at>wizzy.com
Remote Name: 24.117.89.15
Date: April 23, 2003

Comments

The resistor is to limit current through your coil, you need to connect the center resistor tap to hot and the 1.2 ohm side to your coil. If your electronic dist. has a power harness for the pick-up more than likely you'll run that to the 5 ohm side - this is just a guess.

 


Last changed: May 04, 2010