|Vote for The Forward Look Network on the Mopar Top 100 Sites|
From: Daven Anderson
Remote Name: 188.8.131.52
Date: May 06, 2003
The ONLY swapped spindles that would have correct geometry are 1956-78 C-body spindles. E-body spindles would SERIOUSLY **** up a Forward Look Mopar's drivability, whereas if you used the Fatman Fabrications F-body 2" drop spindles, your geometry would still not be correct BUT it would be close enough to where you could drive the car on a public road without killing yourself and/or others. You DO know that you can turn down your torsion bars and get the same effect, and since no one makes dropped C-body spindles, your ride and handling will be compromised no matter what you do. Have a nice day!