Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re: Rear gears and where

From: paul e
Email: 033379111
Remote Name: 203.97.2.242
Date: May 26, 2003

Comments

I think that if your truck has 14" wheels, the low 1st and 2nd gears will allow it to take off O.K. using a 3.23. A 3.55 would be better, if available. If the wheel stud pattern matches the cars, you could go down in diameter, if you are using 15" or 16" wheels.

 


Last changed: May 04, 2010