Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re: GAS TANK SENDING UNIT QUESTION

From: RobertB
Email: rob<@>wizzy.com
Remote Name: 24.117.89.15
Date: June 23, 2003

Comments

Take a volt meter and measure the DC voltage across the sending unit when the car is on (make sure your not on the ohms setting!) at low and high fuel volume. Find someone with the original sending unit and have them take the same measurements and compare the results. I would except mine is sitting in a paper bag in my garage.

 


Last changed: May 04, 2010