|Vote for The Forward Look Network on the Mopar Top 100 Sites|
From: Edward Petrus
Remote Name: 188.8.131.52
Date: June 28, 2003
This has been addressed MANY times on these pages. You should search the archives for all the possibilities. Some folks say that you can loosen the large nut holding the drum assembly onto the end of the axle and drive around the block, but THERE'S NO SUBSTITUTE FOR THE CORRECT PULLER. There's a guy on here somewhere that makes them if you can't find one (but I forget his name). If you need, email me privately and I'll send you a picture of the puller you need.