Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re: c body rear end swap. ????? s

From: Jim Lusk
Email: jimlusk@pacbell.net
Remote Name: 63.207.252.138
Date: July 03, 2003

Comments

Brandon, Take some measurements. First the spring perches. If they are the same the rear end will physically bolt into place without any difficulty. Then measure the overall width. If it much wider than your original you might have wheel/tire clearance issues. If it's with an inch or so you should be fine.

 


Last changed: May 04, 2010