Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re:a little A and LA engine stuff

From: Jeffc
Email: jeffc@pcez.com
Remote Name: 209.102.127.187
Date: August 05, 2003

Comments

That is my understanding also, that there was a change in the 62 block and the hex drive pump became standard to all sb mopar engines that year up as well as the 6 bolt crank flange. As the pump out put in the poly engines should be around 60 to 70 pounds of pressure it would be a HP pump in most of the later LA engines who's pumps. stock, were much lower rated.

 


Last changed: March 03, 2024