Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re: 1960 d100 rear end

From: jeffc
Email: jeffc@pcez.com
Remote Name: 209.102.127.157
Date: August 18, 2003

Comments

Claw type pullers most often will not do the job..... the type you need goes to the wheel studs and is held on with the lug nuts to the drum.... I use the slide hammer type, but I could see the advantage of a hydro type..... much better to rent the puller as you don't do this often and they are not cheap.

 


Last changed: May 04, 2010