Vote for The Forward Look Network on the Mopar Top 100 Sites 

Re: ring and pinion

From: Hank Dozier
Remote Name:
Date: August 20, 2003


Two size rear ends came in those Plymouths. BOTH are 3rd member type axle assemblies. The smaller is an 8 1/4 ", used in the 6 cylinder and some V-8s, and the others (including station wagons) used the 8 3/4". Best way to determine which you have is to get a gasket for an 8 3/4, and then crawl under the car with it and measure your pumpkin bolt hole spacing versus this gasket. If a match, you have an 8 3/4 rear.


Last changed: July 19, 2018