Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re: More Poly 318 Rebuilding Questions

From: Jeffc
Email: jeffc@pcez.com
Remote Name: 209.102.127.236
Date: September 11, 2003

Comments

Pocket porting the heads and a little polishing will do wonders for peformance even with stock valves, gains in HP and tork, these poly heads flow better than most and pocket porting will just make them flow more. Poly heads with 2.02 intake and 1.69 ex valves with out preform the later LA 340 X and J heads with the same valves, however, for the poly those valves are not off the shelf parts.

 


Last changed: March 03, 2024