Vote for The Forward Look Network on the Mopar Top 100 Sites 

Re: lower control arm shaft

From: chuck lowe
Remote Name:
Date: September 24, 2003


BOB:::this is what the manual says---TIGHTEN OUTER SHAFT NUT TO 180 FOOT POUNDS.INSTALL COTTERPIN.---at this setting-crown nut can unscrew about one turn before it touches cotterpin---should i shim with washers ??---what could be the problem??---i don't even have a theory---any and all help welcome---later---chuck lowe


Last changed: July 19, 2018