Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re: Very hard brake pedal on '55 NYer problem

From: casey
Email: kcasey@krmustang.com
Remote Name: 67.74.136.151
Date: October 21, 2003

Comments

the way you test the booster is pump up the pedal with the engine off. hold your foot down on the pedal after pumping it and start the car. the pedal should then drop down a little. if it does not then the booster is not working. old rubber brake hoses can colapse inside and create a hard pedal. i have seen this lots of times on customers old cars.

 


Last changed: May 04, 2010