Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re: Very hard brake pedal on '55 NYer problem

From: Mopar Randy
Email: randyblizzard@aol.com
Remote Name: 64.12.96.167
Date: October 22, 2003

Comments

I'd suspect the booster. That's typically the cause of a hard pedal. If a brake line was crimped, once that brake did apply from pedal pressure, the return spring would never be able to pull that brake off if it's as hard to get braking as you say. The brake with the crimped line would never turn loose. Good luck, Mopar Randy

 


Last changed: May 04, 2010