Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re: starter pinion

From: Joe Mac
Email: atwork.com
Remote Name: 64.252.110.157
Date: October 23, 2003

Comments

Chuck, Don't mess with it! I had the same thing, spent a whole day taking the Bendix apart and resetting it (a real pain). Later I was looking in the service manual and it said if the drive is extended and locked, install it meshed with the ring gear and when the engine starts it will return to the disengaged position. It also recommended against dissassembly because if you don't get the locking pin in the correct groove when you reassemble, it won't work properly.

 


Last changed: May 04, 2010