|Vote for The Forward Look Network on the Mopar Top 100 Sites|
Remote Name: 126.96.36.199
Date: October 27, 2003
Working on a 1962 300, which has a 1964 413 under the hood. I'm wanting to know if anyone has had any clearance problems with the following specs under the hood: Valve Lift: Intake = .458", Exhaust = .470" Duration: Intake = 208 degrees, Exhaust = 214 degrees Timing Opening: Intake = 5 degrees ATC, Exhaust = 42 degrees BBC Timing Closing: Intake = 33 degrees ABC, Exhaust = 8 degrees BTC Looking to use a stock length pushrod and just wondered if I may have any clearance issues...