Vote for The Forward Look Network on the Mopar Top 100 Sites 


Use the 413 that came with it!

From: Daven Anderson
Email: 1961fury<at>Leapmail.net
Remote Name: 204.32.207.245
Date: November 11, 2003

Comments

Well OK if you want to stuff that boat anchor into your '60, you will need a bellhousing for the A-466 with the "A & Early Hemi" bolt pattern. Since A-466 bellhousings bolt on, you can bolt this onto the 1960 transmission. The HARD part of this swap would be the motor mounts, since all the motor mounts changed significantly with the change to unibody/front subframe construction that year. The motor mounts will have to be custom-made, as the Early Hemi was not offered in passenger cars by then.

 


Last changed: May 04, 2010