Vote for The Forward Look Network on the Mopar Top 100 Sites 


Help with 55 Desoto factory A/C pics

From: Lee Lopes
Email: l.lopes@worldnet.att.net
Remote Name: 198.97.67.54
Date: November 12, 2003

Comments

Hi Everyone. I was getting to the point of hanging the factory a/c compressor to the 55 Desoto that i'm working on. I need to make/find brackets for the big ol' York behemoth 2 cyl comp. so i started looking in the service manual and lo and behold there are no real good pics of the compressor mounting brackets for 1955. there's a good layout view of the R22 type used in 1954 but of course not of 55. Has anyone got factory a/c in their 55 desoto? I have brackets for a 55 Chrysler, but the desoto front timing cover and bolt points are very differnt. If you or someone you know has this setup, could I possibly get pics of the bracket mounting points? and the idler pulley too? These are the only parts I do not have. The brackets I can make but I would like to mimic a factory bracket as best as I can. I also have a double idler pulley for the water pump, but do not have the correct bracket for it. and lastly the oil fill tube is way different. I think I can get one of those made, and put the baffle insert in the new one. Has anyone gone through this exercise? any help is appreciated. Thanks in advance, Lee

 


Last changed: May 04, 2010