Vote for The Forward Look Network on the Mopar Top 100 Sites 

Re: shaving a 57 torqueflite

From: Mike B
Email: saukriversetters@isomedia.com
Remote Name: 66.114.157.145
Date: December 23, 2003

Comments

jd, If you are using the cast iron torqueflite on a a 360, besides the crank clearance problems, you also have a little difference in the drive sleeve for the front pump on the tranny. I do not know that a "newer" TC can drive the old torquflite. I think you are really better off either doing the 360 with the aluminum torqueflite, or going to the old 361 and the cast iron TF. mike

 

Last changed: May 04, 2010