needed some linkages made, so I had some extras made to sell. they look great and fit great. comes with nuts/washers/pins. I'll have the bell crank made in the next few weeks if anyone needs it too.
I wasnt able to locate a good source for the snap-clip on the carb end yet. If anyone knows where to get 100quanity of 1/4" clips RH, please let me know. Thanks!
Posted 2012-07-31 3:31 PM (#332536 - in reply to #307649) Subject: RE: Cross ram linkage, reproduced here
Veteran
Posts: 258
I still have some available. Been selling a few sets here and there. so far everyone says they are happy with them.
I'm supposed to be getting the bell cranks made soon.
Posted 2013-12-08 5:38 PM (#415169 - in reply to #332536) Subject: RE: Cross ram linkage, reproduced here
Veteran
Posts: 258
Update on long ram linkage... rods and slides are still 57.00/pair and the center crank is 175.00 Anybody needing one or both of these just let me know. Shipping in lower 48 has been about 12.00 Thanks!
Posted 2014-08-20 11:50 AM (#453674 - in reply to #444156) Subject: Re: Cross ram linkage, reproduced here
Veteran
Posts: 258
I have one center crank left, I will see about getting more and when. Rods/Slides are still available! I have 11 sets left now, Please let me know if you have any interest. Thanks! sachasl@yahoo.com
Posted 2014-10-09 1:24 AM (#458601 - in reply to #453674) Subject: Re: Cross ram linkage, reproduced here
Regular
Posts: 72
Hi, do you have the underside lever that the pedal linkage attaches to? I have evrything from the crossram to the carbs but missing the lever on the underside. Any help much appreciated as I'm in Australia and struggle to find parts!
Posted 2014-10-14 5:32 PM (#459223 - in reply to #458601) Subject: Re: Cross ram linkage, reproduced here
Veteran
Posts: 258
kylie - 2014-10-09 12:24 AM
Hi, do you have the underside lever that the pedal linkage attaches to? I have evrything from the crossram to the carbs but missing the lever on the underside. Any help much appreciated as I'm in Australia and struggle to find parts!
I do have that piece. I usually sell the whole thing ( swivel with arm ) let me get back to you on a price. Thanks