|
|
Expert
Posts: 1302
Location: Skaneateles,NY(summer)/Port St.Lucie,FL(winter) | Can anyone tell me if the '57 DeSoto Hemi (S-25/S-26) water pump interchanges with any other engine and/or year? Specificlly, will it interchange with the '55 DeSoto Hemi?... |
|
|
|
Location: Parts Unknown |
The block is the same casting. I would think the WP would remain interchangeable. Not near my parts book now, or I'd look it up. |
|
|
|
Board Moderator
Posts: 3186
Location: The not-so-great, dirty-white North ( Michigan) | Tony....
The water pump for a 55/56 DeSoto is PN 1653423. The 57 is unique with a PN of 1752218.
I think the difference is the shaft as the repair kit for 56 and 57 is the same. The 55 is different due to the bearing, if I remember.
Also, note that the 57 Adventurer, like the S25/26 cousins, has a different timing cover due to the water inlet now being cast into the cover, and relocated lower to make room for the divorced PS pump. So the whole front dress moves forward about an inch. |
|
|
|
Expert 5K+
Posts: 5139
Location: cornpatch county, Southwest IOA | Toney My recent research shows: 52-56 Desoto V8 waterpump interchange, but nothing later. I need one for a 56 firedome 330, and i'm having trouble finding one. The bearing is good but the seal leaks. I am looking for a source to have mine rebuilt. Good Luck!......over....... |
|
|
|
Expert 5K+
Posts: 8947
Location: WHEELING,WV.>>>HOME OF WWVA | CORNPATCH--------kanter has the pump you need but you ain't going to like the price------------later |
|
|
|
Expert 5K+
Posts: 8947
Location: WHEELING,WV.>>>HOME OF WWVA | collectorsautosupply-----------list the pumps as being the same-1653423 & 1752218------they have 22 of them-cost not listed-----------------later
Edited by 60 dart 2005-01-25 9:51 AM
|
|
|
|
Elite Veteran
Posts: 1159
Location: D-70199 Heslach | I have the same problem as most S25/S26 Owner. In case the pump leaks or is noisy they find out that the pump is unique
Therefore I am looking for an interchance possibility, too.
There are many similar pumps on the market but nowhere are dimensions avialable.
So chevy, ford, mopar owner - Take a quick look at the cellar if your spare parts include a similar pump, and check the major dimensions, such as bolt circle and distance from sealing surface to shaft.
(p2.jpg)
Attachments ---------------- p2.jpg (117KB - 224 downloads)
|
|
|
|
Elite Veteran
Posts: 1159
Location: D-70199 Heslach | Maybe somebody know, where to get those bearings and sealings |
|
|
|
Expert
Posts: 3034
Location: N.W. Fla. | Check with "Wayfarer", he's QEC, may have the seals. |
|
|
|
Veteran
Posts: 253
| Just a note for you -- if you see a notation that Collectors in Oroville has "22" -- that is actually their code -- that they know of someone who has it -- they don't have it -- they have very little --
they are an "outsourcer" -- trying to sell other peoples' merchandise -- and have you noticed "their" price.... on ANYTHING!!!!!!!!!!!!!!!!
If rape were legal -- they still wouldn't qualify....
Want to be smart -- Ignore them -- we all do................. |
|
|
|
Veteran
Posts: 242
Location: 33844 | I am in the same boat , as per my discussion 5 lines down , and I just ordered the rebuild kit from Collectors Auto Supply for $80. The price of a pump or rebuild yours is $250. I will let you all know of the outcome. |
|
|
|
Elite Veteran
Posts: 1159
Location: D-70199 Heslach | Rich,
I've seen your thread .... (to late).... sorry that I reanimate this here instead of yours
I'm interested in the Collectors Auto Supply parts number.
|
|
|
|
Veteran
Posts: 242
Location: 33844 | Part # 1752301. Phone # 888-772-7848. Maybe wait until I get mine and check it out !! |
|
|
|
Veteran
Posts: 242
Location: 33844 | Generic seals of the right size would be E-Z to get , but I knocked my old one apart and new seals alone would not fix it --- the shaft was corroded. |
|
|
|
Elite Veteran
Posts: 1159
Location: D-70199 Heslach | Ok, I wait until you get 1752301
But I don't think, that you will find those seal easily,- its shaped.
Here are some pictures to the theme, including the seal on pic 9672
(9670.jpg)
(9671.jpg)
(9672.jpg)
(9673.jpg)
(9674.jpg)
Attachments ---------------- 9670.jpg (133KB - 238 downloads) 9671.jpg (140KB - 222 downloads) 9672.jpg (101KB - 206 downloads) 9673.jpg (145KB - 239 downloads) 9674.jpg (127KB - 224 downloads)
|
|
|
|
Elite Veteran
Posts: 1159
Location: D-70199 Heslach | Richbo - 2016-02-16 6:15 PM
I am in the same boat , as per my discussion 5 lines down , and I just ordered the rebuild kit from Collectors Auto Supply for $80. The price of a pump or rebuild yours is $250. I will let you all know of the outcome.
1752301 is sold out,- you got the last one |
|
|
|
Expert
Posts: 2289
Location: Eastern Iowa | I have a case of #2084-228 water pump repair kits. They are NOS
You guys will have to do your own research on weather any of the parts will fit your applications.
I'll dig one out and take pictures and post up on the for sale section. |
|
|
|
Elite Veteran
Posts: 1159
Location: D-70199 Heslach | Today I found a source for for water pump seal.
Does anybody know which dimension had the original seal. 5/8 is the shaft diameter...but the rest.
Dave, maybe you could tell us the size for later times.
Compare this screenshot with picture 9672
(2016_03_03_002.jpg)
Attachments ---------------- 2016_03_03_002.jpg (37KB - 228 downloads)
|
|
|