|
|
Veteran
Posts: 131
Location: Western Australia | Hi all, sorry for not posting here too much, , fairly busy with the Christine club.
However, thought I would share with you guys the news.
Jeekay, a member here and I did a deal on his glorious 58 plymouth.....this was formerly the car that came from Aaron (C-300), was taken care of by George, and has now passed to me to take care of her.............
Im very happy, she arrived today after her long trip across the country........ |
|
|
|
Veteran
Posts: 131
Location: Western Australia | here she is
(060.JPG)
Attachments ---------------- 060.JPG (126KB - 146 downloads)
|
|
|
|
Expert 5K+
Posts: 8443
Location: Perth Australia | Cool, so whats the plans Steve?
|
|
|
|
Veteran
Posts: 131
Location: Western Australia | soak it up for a while mate......been a long time coming.
I have trip in a couple of weeks, then once back from that......play time.!!!
where are you ? |
|
|
|
Expert 5K+
Posts: 8443
Location: Perth Australia | Bellevue
|
|
|
|
Veteran
Posts: 131
Location: Western Australia | you would have been closer to my car than I was yesterday...........
Im out at success.......
|
|
|
|
Expert 5K+
Posts: 8443
Location: Perth Australia | Could have been, I was in forrestfield most of yesterday
So how many times have you polished it lol
I bet you have to keep going outside for 1 reason or another
|
|
|
|
Expert 5K+
Posts: 8443
Location: Perth Australia | I have this at my place (Customers car)
(Blue dodge 011.jpg)
Attachments ---------------- Blue dodge 011.jpg (67KB - 134 downloads)
|
|
|
|
Veteran
Posts: 131
Location: Western Australia | I got her late yesterday arvo Mick,,,,I have done nothing to her other than refit the twin aerials, put the hubcaps back on....and go for a spin around the block.
I intend to have a play today.........but i need fuel in her....and she is not registered, , what can I do about that mate.
|
|
|
|
Expert 5K+
Posts: 8443
Location: Perth Australia | You can get a permit (not sure about today though) that you can say that your taking it for repairs for future licencsing
I think its about 20 bucks and you can do it online or over the phone
I would check and see if the inspection places are open this morning, might be able to get it over today (if your lucky)
|
|
|
|
Veteran
Posts: 131
Location: Western Australia | i was just looking at that then,,,,,,i can get a permit as you say....
then "take her for repairs" |
|
|
|
Veteran
Posts: 131
Location: Western Australia | looks like its monday to friday for the inspections.........Monday is a day off for me...
|
|
|
|
Expert 5K+
Posts: 8443
Location: Perth Australia | Your repair places are all over perth, god knows where you can get "1 of those things" fixed today
Maybe one of your friends or relos might know of a place, you could drive over to their place and ask, no point in wasting a phone call
|
|
|
|
Veteran
Posts: 131
Location: Western Australia | true............
i hate phones anyway......
I will get a permit today, weather permitting and go fuel her up......do you know what fuel would be best and should i use additive......she is a bog standard 318 poly, with 4 barrel |
|
|
|
Expert 5K+
Posts: 8443
Location: Perth Australia | Hard 1
I have always just ran on normal unleaded
I have never used the addative, but it might be a good idea
I have had the heads done on mine to suit unleaded (same as what they do to run gas)
That red dodge, I can garrantee will be just run on std unleaded
|
|
|
|
Veteran
Posts: 131
Location: Western Australia | ok thanks....im getting differing views,, but yours is as I feel it should be.
she will only be used for sunday and shows anyway........I wont be taking her to Exmouth ever.......
Edited by ozysteve 2013-07-12 7:46 PM
|
|
|
|
Expert
Posts: 2473
Location: Dalveen, Queensland, Australia | You don't need additive if you use a tin canister. That does the job. |
|
|
|
Veteran
Posts: 131
Location: Western Australia | whats that Ray........not heard of that before. |
|
|
|
Board Moderator & Exner Expert 10K+
Location: .Norfolk..Mafia.. ,England UK | CONGRATULATIONs on getting her home safe Steve..
You truly deserve this and more for what you have been through mate..
Enjoy and be PROUD and LOUD
Clive
UK |
|
|
|
Veteran
Posts: 131
Location: Western Australia | cheers Clive.....that means a lot.
thanks.
I have a lot to say about this car, , good and bad things, its history is staggering, considering how well these cars last...NOT!!
I have all the documentation, books, mags, trophies that support the cars life.......one I will be happily sharing.
I took here for her first drink of West AUSSIE fuel yesterday........man, that car gets attention. |
|
|
|
Regular
Posts: 78
Location: Southern Hemisphere | Beautiful car Steve, looking forward to seeing her in the flesh soon. |
|
|
|
Elite Veteran
Posts: 716
| Just having a look-see at you guys down under.
Yes, Steve, you can't put that car on any road without getting tons of attention - that's everywhere in the galaxy I believe.
Congrats......post some photos of her in the daylight please. |
|
|
|
Expert
Posts: 2473
Location: Dalveen, Queensland, Australia | Originally posted by ozysteve
whats that Ray........not heard of that before.
You can get them all over the place, Steve...
The one I've used is a Doring, made on the Sunshine Coast, but there are lots of brands. The best known one is the Fuelstar.
They have pellets of tin inside a container suspended on a steel spring, vibrations cause friction between the tin and the steel, microscopic particles break off and join the fuel that's flowing through there.
One thing I can tell you about them... no, two. First, everyone who's never used them will tell you that they cannot work. Everyone, and that includes me, who has ever used them know they do work.
The claims made for them are octane improvement, better burning and so on, but I can't say about those things. What I do know, and this is an absolute certainty, is that they stop valve seat erosion. I cleaned up a head on a Peugeot once and, because I'd cleaned up (ie. lapped in the valves, had the seats cut etc) the head there was no longer any protective coating from the old leaded fuel on the seats.
I lost 0.015" from each exhaust valve adjustment in 1700kms. I had already ordered the Doring unit and it arrived the day after I got home, once that was fitted there was not another thou of valve seat/valve wear, no adjustments were needed, for 50,000kms. I was using LRP at that time.
Then the wear started to come in again big time. I contacted Doring and they explained that LRP often had a fungus grow in it and that this fungus coated the tin pellets. Their recommendation was to dismantle the canister, soak the tin pellets in bleach and/or sandpaper them clean, then reassemble it. I did both.
I did a further 50,000kms over the next six months with no problems. Those things work!
You might have heard of the RedEx Trial re-runs they've done over the last few years? They're run by the Victorian Peugeot Club, so they get a lot of Peugeots. In the first one there was a whole heap of these cars had their engines done up for the event. The popular wisdom was, "We don't need hard valve seats, we've never had any trouble!"
So as they headed out over the first couple of days the various engine workshops up the coast were busy fitting hard valve seats to all these old Peugeots!
Once that protective coating from the old leaded fuel (last sold here about 2001?) is gone the seats just wear away. Fitting the tin canister arrests that immediately because the tin acts just like the lead used to do. It was going to be the product used by fuel companies when they were doing their research back in the twenties, but they couldn't work out a way to keep it suspended in the fuel, I'm told.
Whatever, you have my personal guarantee that they work, you don't need to get hard seats fitted if you use one, you mount it in the fuel line just before the carby. |
|
|
|
Veteran
Posts: 131
Location: Western Australia | Well, there you go,, thanks for that Ray, ,
I have never heard of them before..........would they be available in auto stores...Repco, autoone, super cheap,, those sort of place.......?
|
|
|
|
Expert
Posts: 2473
Location: Dalveen, Queensland, Australia | Repco's following stores are listed on the Unique Cars & Parts website as carrying the Doring catalysts, Steve:
Osborne Park, Morley, Port Hedland, Welshpool, Victoria Park, Wangara, O'Connor and Myaree (all in WA). I've personally never seen them in any store, actually, but I've never looked for them in a store. |
|
|
|
Member
Posts: 23
Location: Victoria, Australia | O yer.. Very nice, well done mate.
Cheers |
|
|
|
Veteran
Posts: 131
Location: Western Australia | Nice one Ray.........i will have a look around. |
|
|
|
Veteran
Posts: 131
Location: Western Australia | Thanks Baron.........im very happy with her |
|
|
|
Extreme Veteran
Posts: 390
Location: Brisbane | Hey Steve, nice car mate, glad to see you finally rolling in your very own christine! |
|
|
|
Veteran
Posts: 131
Location: Western Australia | cheers Dan......it took a while, but I got there |
|
|
|
Veteran
Posts: 131
Location: Western Australia | did the wheel bearings today, they where a little loose, so decided to pull them and inspect.
They were perfect, but needed the old grease washing out, looks like they hadnt been done in a while. So gave them a good wash out and clean, repacked and refitted. Whilst I was at it I gave the cooling system a good flush....cleaned out the hoses, heater core and block.....it was dirty in there, so a job worth doing.
Now with fresh coolant and fresh grease.......im really enjoying playing with her. |
|
|
|
Veteran
Posts: 131
Location: Western Australia | here are a few photos of my car..........thought I would share with them with you good folk |
|
|
|
Veteran
Posts: 131
Location: Western Australia | here are a few photos of my car..........thought I would share with them with you good folk |
|
|
|
Expert
Posts: 2473
Location: Dalveen, Queensland, Australia | Look forward to seeing them... |
|
|
|
Veteran
Posts: 131
Location: Western Australia | looking forward to posting them.............what happened!!!!! |
|
|
|
Veteran
Posts: 131
Location: Western Australia | here is a nice shot.........
(622 (800x450).jpg)
Attachments ---------------- 622 (800x450).jpg (206KB - 129 downloads)
|
|
|
|
Veteran
Posts: 131
Location: Western Australia | what would be the best options for me to show this car in Perth for the coming summer. I am not a member "as yet" of any clubs or groups. But want to get her out there. has any one got any advice |
|
|
|
Veteran
Posts: 131
Location: Western Australia | and another
(625 (800x450).jpg)
Attachments ---------------- 625 (800x450).jpg (214KB - 130 downloads)
|
|
|
|
Expert 5K+
Posts: 8443
Location: Perth Australia | Steve
There isnt any specific club that our cars sort of fit into here, the closest one would be the charger club
I havnt been to their meetings yet (I think they are on the first monday of the month), but will one of these days
I dont really know the show scene here much, but big als poker run is one and I went to a show at whiteman park that was pretty good.
|
|
|
|
Veteran
Posts: 131
Location: Western Australia | thanks mate, , yes im getting the feeling that club choices are limited.......maybe,, ,maybe we should be getting out heads together... |
|
|
|
Expert 5K+
Posts: 8443
Location: Perth Australia | Thought of it also, but time to start and run (or have much to do with) is short for me
There are very few FL cars in Perth (that I know about)
3 60 phoenix's, 2 57/58 plymouths (including yours), 2 60 plymouths (+ one rumoured) a couple of 60 ish chryslers (1 with cross rams)
and a 56 300
Be lucky to see them all at one time
The 2 60 plymouths I know about are both under construction (includes mine), the rumoured one is a driver and is purple (I think)
But in saying all this, I have not gone to many shows and pretty much am head down tail up working on my dodge
|
|
|
|
Regular
Posts: 78
Location: Southern Hemisphere | 57/58 Plymouths in Perth = at least 5 with another on the way next year.
So far Steve's 'US '58 Belvy 4dr HT, heldam's Aust '58 Belvy 4dr HT, Matt's '57 2dr Savoy HT, a '57 Savoy 4dr sedan and a "Customised" '57 hardtop. |
|
|
|
Elite Veteran
Posts: 716
| Just saying hi again - Kate too.
By the way Kate's 350 runs just fine on mid-grade fuel with no additives.
Although her carbs are new so not sure if that makes a difference.
Your paint looks to be tons better than mine - good for you both.
I also have the 57 twin post mirrors I hope to get mounted this winter - summer for yall I reckon.
Hope things are well down there and Merry Christmas.
(KateFall2013.jpg)
Attachments ---------------- KateFall2013.jpg (40KB - 135 downloads)
|
|
|
|
Veteran
Posts: 201
Location: Fremantle, Western Australia, Australia | Hi Steve, great PLYMOUTH!!!
Good to see a few more around
I have one as well
(P1020773_resize_resize.JPG)
Attachments ---------------- P1020773_resize_resize.JPG (49KB - 125 downloads)
|
|
|
|
Veteran
Posts: 201
Location: Fremantle, Western Australia, Australia | Here are some better size photos, photos are from 2011,
but the car has changed since then
Edited by roblun 2013-12-25 2:35 AM
(P1020773_resize.JPG)
(P1020774.JPG)
(P1020777.JPG)
(P1020778.JPG)
(P1020780.JPG)
(P1020781.JPG)
(P1020775.JPG)
(P1020779.JPG)
Attachments ---------------- P1020773_resize.JPG (209KB - 122 downloads) P1020774.JPG (242KB - 126 downloads) P1020777.JPG (226KB - 121 downloads) P1020778.JPG (245KB - 117 downloads) P1020780.JPG (236KB - 119 downloads) P1020781.JPG (232KB - 117 downloads) P1020775.JPG (239KB - 122 downloads) P1020779.JPG (247KB - 121 downloads)
|
|
|
|
Expert
Posts: 1906
Location: Ontario, Canada | A Dodge dash in a Plymouth body------- I didn't know they did that. Thanks for sharing. RHD always looks interesting to me as well!
Happy Holidays,
Greg |
|
|
|
Veteran
Posts: 131
Location: Western Australia | Roblun........thats a nice example, do you bring her out much?
I will be attending the cars and coffee meet on the 29/12/13, , this sunday at captain munchies in freo........we should meet up. |
|
|
|
Veteran
Posts: 201
Location: Fremantle, Western Australia, Australia | Hi Steve, the car is at the workshop, having major
Surgery...
The 318 motor was totally stripped and rebuilt
From top to bottom, with the original 2x4 barrel
Setup.... Silver motor with Twin Gold air filters,
Hopefully gold Rocker covers.
Brand new brakes, conversion from normal
Brakes to Original Power brakes setup
Brand new Radiator, Air con, new paint in the
Engine bay, new leads, hoses and wiring all tidy up.
Powder coated brackets and other bits and pieces.
Swapped all my Gauges, for New old Stock, all working
Including the clock which was a bonus, working
Cig lighter... And a original Mirror-o-Matic.
Radio has been taken out to be resorted to working order
And the original speakers have been re-coned. I also have
A Alpine sound system to put in, but it's going to be hidden
With Bluetooth connectivity, I have a new iPhone 5s for
Xmas and I'm going to turn my old iPhone 4S into
An iPod for music it has a 64gig for storage.
Also have the original twin double post side mirrors
To put on and the original rear Twin antenna's.
And original spats.
3 speed Transmission has also been stripped and rebuilt
A while ago, but that's fine, I purchased the car in 1988
And did the motor up in 1990... So it had a good 23 years
Run... Looking FORWARD to getting her back.
Probably another 6- 8 weeks away from finishing.
Hopefully the engine will look like this, its almost there.
The only thing I have not got is the Jiffy bag, but I think there
is one on eBay...a reproduction
Regards
Roberto
Edited by roblun 2013-12-25 11:51 PM
(12EA2731-5D90-43F8-8E1C-FDC9269B8F63_3.jpg)
(12EA2731-5D90-43F8-8E1C-FDC9269B8F63_4.jpg)
Attachments ---------------- 12EA2731-5D90-43F8-8E1C-FDC9269B8F63_3.jpg (48KB - 121 downloads) 12EA2731-5D90-43F8-8E1C-FDC9269B8F63_4.jpg (53KB - 116 downloads)
|
|
|
|
Veteran
Posts: 201
Location: Fremantle, Western Australia, Australia | Hi Greg, yeah that dodge Dash, every time
I need a part for my interior I have to look under
Dodge and anything else like body parts, I need
To look under Plymouth plus also it's in reverse
Because it's RHD... I have a 1958 workshop books
For both Dodge and Plymouth!!!
Merry Xmas and new Year to all
Regards
Roberto |
|
|
|
Expert
Posts: 2473
Location: Dalveen, Queensland, Australia | That looks like a Weiand manifold...
A local production car, it wouldn't have had any more than a single 2-barrel originally. |
|
|
|
Veteran
Posts: 131
Location: Western Australia | is that right Ray........ |
|
|
|
Expert
Posts: 2473
Location: Dalveen, Queensland, Australia | I'm pretty sure...
There wasn't much in the way of options here those days. |
|
|
|
Veteran
Posts: 131
Location: Western Australia | what about the bumper wing tips.....were they options here?
Im just wondering if the 2x4's were optioned onto the car as well |
|
|
|
Veteran
Posts: 201
Location: Fremantle, Western Australia, Australia | Hi guys the car had a 2 barrel Carby, the 2x4 setup I purchased about 2 years ago, the Carbs from eBay
and the manifold from Big M ( John ). The Wing tips came with the car when I purchased in 1988 with the
Chrome strips along the roof was an extra. 2X4 setup option are for the 57 & 58 Plymouth Fury's and other
Mopar Cars from that era. Gold oval Air filters I purchased about 10 months ago once I new I had the 2x4
setup
The Mirror-o-Matic was another option, I purchased that about 3 years ago from Hank with the rear twin antenna from another forum, I
have been very luck with parts and very lucky to have purchased my Plymouth as it is in those photos taken
in 2011. When I purchased the car I put a $50 deposit on when I saw it and just as I was leaving a guy had came to purchase the car with the whole price in cash!!!
The only thing I have done as in the body is to Paint the roof again in 2 pack paint and change to dash from being all black to Black on top and white
along its face in 1995.
Happy New Year
Edited by roblun 2013-12-27 9:25 PM
|
|
|
|
Veteran
Posts: 131
Location: Western Australia | well its a lovely car and i hope one day soon we can cruise together..... |
|
|
|
Veteran
Posts: 131
Location: Western Australia | not posted much on this thread in a while......nice to meet Mike the other day too....
these are some pics taken over the last year or so
Edited by ozysteve 2016-08-29 5:16 AM
(14067595_1325664417473634_7016816051055774172_n.jpg)
(11988536_1029653670410970_4136083238883999930_n.jpg)
(12274634_1308530099173263_2417524663412508332_n.jpg)
(12042916_1036656313044039_1626115403176114233_n.jpg)
Attachments ---------------- 14067595_1325664417473634_7016816051055774172_n.jpg (161KB - 123 downloads) 11988536_1029653670410970_4136083238883999930_n.jpg (120KB - 120 downloads) 12274634_1308530099173263_2417524663412508332_n.jpg (86KB - 125 downloads) 12042916_1036656313044039_1626115403176114233_n.jpg (61KB - 112 downloads)
|
|
|
|
Location: North Australia | Ripper Plymouth, thanks for updating. I hope to see your car one day.
Steve. |
|
|
|
Expert 5K+
Posts: 8443
Location: Perth Australia | Good to finally meet you Steve
It was a good meet, shame it was so darn cold
|
|
|
|
Veteran
Posts: 131
Location: Western Australia | boy was it cold......i was battling off a cold, but spent the next two days paying for it after sitting in the carpark |
|
|