326 block
Handygun
Posted
2014-01-12 11:35 AM (#421652)
Subject:
326 block
Elite Veteran
Posts: 1119
Location: STL, MO
Is the 326 a dedicated casting or just a 40 over 318? Thinking of doing a Poly stroker like Chuck and was looking for extra wall thickness.
57chizler
Posted
2014-01-12 3:29 PM (#421695 - in reply to #421652)
Subject:
RE: 326 block
Expert
Posts: 3778
Location: NorCal
The 301, 326 and 318 all share the same 1737929 casting number.
Rodger
Posted
2014-01-12 3:31 PM (#421696 - in reply to #421652)
Subject:
Re: 326 block
Expert
Posts: 1506
Location: Colo Spgs
Steve
Not only are they just a 40 over 318, they have Hydraulic Lifters too.
Rodger & Gabby
COS
Handygun
Posted
2014-01-12 7:13 PM (#421721 - in reply to #421652)
Subject:
Re: 326 block
Elite Veteran
Posts: 1119
Location: STL, MO
well so much for that, Thanks guys.
Mopar1
Posted
2014-01-19 7:10 PM (#422962 - in reply to #421695)
Subject:
RE: 326 block
Expert
Posts: 3035
Location: N.W. Fla.
57chizler - 2014-01-12 2:29 PM
The 301, 326 and 318 all share the same 1737929 casting number.
If they are the same casting, that should mean the 318s could be drilled for hyd lifters if a template for the 326 was available???
Edited by Mopar1 2014-01-19 7:11 PM