|
|
Veteran
Posts: 295
Location: Rochester, NY | I have a bunch of 57 Plymouth Parts that I've decided to sell. I'll try this forum before I go the e-bay route. All body style specific parts are from a 2 door hardtop. Most all of it is used. I have just a few NOS pieces. NOS Headlight Surrounds and parking lights and a possibly a very nice Grill Emblem. Used: I have front and rear Window Trim, Grill, Headlight surrounds, Side trim: fender uppers-door uppers and lowers, 1/4 uppers and lowers, 1 pair of Ribbed Roof Molding, 2 sets of fender spears, 1 pair of fin top trim, Belvedere 1/4 emblems, Grill emblems, Some inside trim including dash trim/parts, tail light lenses and more. I have a complete list but it's quite long. I don't feel like typing the whole list. Just e-mail me if you're looking for something specific at: trustinchrist@rochester.rr.com. I'll let you know what the price is and then if you're interested, I'll take and send you as many photos as you'd like.
Thanks for looking,
Bob |
|
|
|
Expert
Posts: 3480
Location: Montreal, Canada | I sent you an email about the roof mouldings and some other parts. Thanks bob! |
|
|
|
Veteran
Posts: 295
Location: Rochester, NY | soiouz - 2014-08-15 9:16 PM
I sent you an email about the roof mouldings and some other parts. Thanks bob!
Reply sent to your e-mail...Thanks David...
Here is a complete list of what I have/had. I'll try to keep up with what's gone/still available.
1) 1 Heater Core with Blower Plenum (used)
2) 2 Jiffy Jet Winshield Washer Fluid Bags (fair-used)
3) 2 Mayflower Grill Center Emblems (good-used)
4) 1 Mayflower Grill Center Emblem (NOS)
5) 3 Pushbuttons, (1 Drive, 1 Neutral, 1 Reverse (used-good) SALE PENDING
6) 1 radio with antenna (used-not working decent-chrome) SALE PENDING
7) 3 Plexiglas speedometer cluster windows/covers (used)
8) 1 pair (left and right) Headlight Aluminum Surrounds-includes both parking lights (NOS)
9) 1 Fender Mount Side View Mirror (used-bad mirror-mirror backside has 2 dents-chrome is still pretty nice)
10) 2 Round Backup Lenses (used-1 is still shiny-both are cracked but could still be used for a driver)
11) 1 Round Backup Lens (NOS)
12) 1 Ash Tray (used-does not include aluminum front fascia plate)
13) 1 Cigarette Lighter Surround (used-aluminum fascia plate)
14) 1 Dash Mounted Rear View Mirror ( used-mirror showing some stains around edges)
15) 2 Passenger Side Front Grills (used-straight-aluminum is dull)
16) 1 Driver Side Front Grill (used-straight-aluminum is dull)
17) 2 Fin Top Stainless Moldings- (used-nice-I believe this is L/R pair not sure how to identify though)
18) 1 Ignition Key Switch (used- no key)
19) 2 Passenger Side Windshield Wipers (used)
20) 3 Driver Side Windshield Wipers (used)
21) 1 Complete-Set Rear Window Stainless Moldings for 2 door hardtop (used-nice 6 pieces)
22) 1 Cowl Stainless Screen (used)
23) 4 Fender Spears (used-pot metal has pits-not terrible though)
24) 1 Dashboard Stainless Molding (used-nice-this fits above glove box door)
25) 2 Interior Rear Panel Stainless Moldings (used-nice-2 door hardtop L/R interchangeable)
26) 1 Trunk Lip Stainless Molding (used-very nice)
27) 1 Passenger Tail Light Surround Stainless Molding (used-nice)
28) 1 Complete Set-Front Windshield Stainless Moldings for 2 door hardtop (used-nice 6 pieces)
29) 1 Glo-Brite Tail Lamp Lens in box (Looks to be NOS)
30) 1 PlyBH Set (L and R) Tail Lamp Lenses (used-nice)
31) 2 Trunk Lid-”Wing Moldings” that fit on top of Trunk Lock (used-pot metal has pitting)
32) 4 Belvedere ¼ Panel Emblems (used-3 have all 3 studs-1 is missing 1 stud) SALE PENDING ON 1 SET
33) 1 Passenger Side Upper (thick) Fender Stainless Molding (used)
34) 2 Passenger Side Upper (thick) Door Stainless Mouldings for 2 Door Hardtop (used)
35) 2 Passenger Side Upper (thick) 1/4 Panel Stainless Mouldings for 2 Door Hardtop (used)
36) 2 Passenger Side Lower (thin) Door Stainless Mouldings for 2 Door Hardtop (used)
37) 2 Passenger Side Lower (thin) ¼ Panel Stainless Mouldings for 2 Door Hardtop (used)
38) 1 Passenger Side Ribbed Roof Stainless Molding (used)
39) 2 Driver Side Upper (thick) Fender Stainless Moldings (used)
40) 1 Driver Side Upper (thick) Door Stainless Moldings for 2 Door Hardtop (used)
41) 1 Driver Side Upper (thick) ¼ Panel Stainless Molding for 2 Door Hardtop (used)
42) 2 Driver Side Lower (thin) Door Stainless Moldings for 2 Door Hardtop (used)
43) 1 Driver Side Lower (thin) ¼ Panel Stainless Molding for 2 Door Hardtop (used)
44) 1 Driver Side Ribbed Roof Stainless Molding (used-nice)
45) 1 Speaker Grill for dashboard (used-nice)
46) 1 Stainless Fin End Cap (used-rough-savable?)
47) 1 Windshield Wiper Switch (used)
48) 1 Terminal block (fits up front by grill under hood-(used)
49) 1 Radio Delete Panel with Stainless Molding on it (used-nice)
50) 1 Horn Ring for power steering car (used-nice chrome) SALE PENDING
51) 2 Dashboard Defroster Cups (round-used-nice)
52) 1 Dashboard Defroster Grill (round-used-nice)
53) 1 Heater Control Lever Plate (used- studs intact-needs rechrome)
Edited by furvedere 2014-08-17 12:48 AM
|
|
|
|
Member
Posts: 11
| I sent you an email as well today. Willing to buy roof rib chrome and side trim . |
|
|
|
Elite Veteran
Posts: 705
Location: California | Interested in the nos drivers side headlight bezel |
|
|
|
Veteran
Posts: 295
Location: Rochester, NY | Mayfair man - 2014-08-17 11:43 AM
I sent you an email as well today. Willing to buy roof rib chrome and side trim .
I still have the ribbed roof moldings and most of the side trim. I've certainly been checking/answering many e-mails...but I don't believe I received yours...please send another e-mail at: trustinchrist@rochester.rr.com
Thank you, Bob |
|
|
|
Veteran
Posts: 295
Location: Rochester, NY | Paul Hettick - 2014-08-18 11:29 PM
Interested in the nos drivers side headlight bezel
I want to keep the NOS headlight/Parking Bezels (Surrounds) as a pair. If you're still interested, please send me an e-mail at : trustinchrist@rochester.rr.com
I will be glad to get you photos.
Thank you, Bob |
|
|
|
Veteran
Posts: 295
Location: Rochester, NY | Updated List:
1) 1 Heater Core with Blower Plenum (used)
2) 2 Jiffy Jet Windshield Washer Fluid Bags (fair-used)
3) 2 Mayflower Grill Center Emblems (good-used)
4) 1 Mayflower Grill Center Emblem (very good-used)
5) 3 Pushbuttons, (1 Drive, 1 Neutral, 1 Reverse (used-good) SALE PENDING
6) 1 radio with antenna (used-not working decent-chrome) SALE PENDING
7) 3 Plexiglas speedometer cluster windows/covers (used)
Cool 1 pair (left and right) Headlight Aluminum Surrounds-includes both parking lights (NOS)
9) 1 Fender Mount Side View Mirror (used-bad mirror-mirror backside has 2 dents-chrome is still pretty nice)
10) 2 Round Backup Lenses (used-1 is still shiny-both are cracked but could still be used for a driver)
11) 1 Round Backup Lens (NOS)
12) 1 Ash Tray (used-does not include aluminum front fascia plate)
13) 1 Cigarette Lighter Surround (used-aluminum fascia plate)
14) 1 Dash Mounted Rear View Mirror ( used-mirror showing some stains around edges)
15) 2 Passenger Side Front Grills (used-straight-aluminum is dull)
16) 1 Driver Side Front Grill (used-straight-aluminum is dull)
17) 2 Fin Top Stainless Moldings- (used-nice-I believe this is L/R pair not sure how to identify though)
18) 1 Ignition Key Switch (used- no key)
19) 2 Passenger Side Windshield Wipers (used)
20) 3 Driver Side Windshield Wipers (used)
21) 1 Complete-Set Rear Window Stainless Moldings for 2 door hardtop (used-nice 6 pieces)
22) 1 Cowl Stainless Screen (used) Sale Pending
23) 4 Fender Spears (used-all have pitting-not terrible though)
24) 1 Dashboard Stainless Molding (used-nice-this fits above glove box door)
25) 2 Interior Rear Panel Stainless Moldings (used-nice-2 door hardtop L/R interchangeable)
26) 1 Trunk Lip Stainless Molding (used-very nice)
27) 1 Passenger Tail Light Surround Stainless Molding (used-nice)
28) 1 Complete Set-Front Windshield Stainless Moldings for 2 door hardtop (used-nice 6 pieces)
29) 1 Glo-Brite Tail Lamp Lens in box (Looks to be NOS)
30) 1 PlyBH Set (L and R) Tail Lamp Lenses (used-nice)
31) 2 Trunk Lid-”Wing Moldings” that fit on top of Trunk Lock (used-pot metal has pitting)
32) 4 Belvedere ¼ Panel Emblems (used-3 have all 3 studs-1 is missing 1 stud) SALE PENDING ON 1 SET
33) 1 Passenger Side Upper (thick) Fender Stainless Molding (used)
34) 2 Passenger Side Upper (thick) Door Stainless Mouldings for 2 Door Hardtop (used)
35) 2 Passenger Side Upper (thick) 1/4 Panel Stainless Mouldings for 2 Door Hardtop (used) SALE PENDING ON 1
36) 2 Passenger Side Lower (thin) Door Stainless Mouldings for 2 Door Hardtop (used)
37) 2 Passenger Side Lower (thin) ¼ Panel Stainless Mouldings for 2 Door Hardtop (used)
38) 1 Passenger Side Ribbed Roof Stainless Molding (used)
39) 2 Driver Side Upper (thick) Fender Stainless Moldings (used)
40) 1 Driver Side Upper (thick) Door Stainless Moldings for 2 Door Hardtop (used) SOLD
41) 1 Driver Side Upper (thick) ¼ Panel Stainless Molding for 2 Door Hardtop (used) SALE PENDING
42) 2 Driver Side Lower (thin) Door Stainless Moldings for 2 Door Hardtop (used) SOLD
43) 1 Driver Side Lower (thin) ¼ Panel Stainless Molding for 2 Door Hardtop (used)
44) 1 Driver Side Ribbed Roof Stainless Molding (used-nice)
45) 1 Speaker Grill for dashboard (used-nice)
46) 1 Stainless Fin End Cap (used-rough-savable?)
47) 1 Windshield Wiper Switch (used)
48) 1 Terminal block (fits up front by grill under hood-(used)
49) 1 Radio Delete Panel with Stainless Molding on it (used-nice)
50) 1 Horn Ring for power steering car (used-nice chrome) SALE PENDING
51) 2 Dashboard Defroster Cups (round-used-nice)
52) 1 Dashboard Defroster Grill (round-used-nice)
53) 1 Heater Control Lever Plate (used- studs intact-needs rechrome) |
|
|
|
Veteran
Posts: 295
Location: Rochester, NY | 1) 1 Heater Core with Blower Plenum (used)
2) 2 Jiffy Jet Windshield Washer Fluid Bags (fair-used)
3) 2 Mayflower Grill Center Emblems (good-used)
4) 1 Mayflower Grill Center Emblem (very good-used)
5) 3 Push-buttons, (1 Drive, 1 Neutral, 1 Reverse (used-good)
6) 1 radio with antenna (used-not working decent-chrome)
7) 3 Plexiglas speedometer cluster windows/covers (used)
8.) 1 pair (left and right) Aluminum Headlight Bezels-(NOS) this set includes parking lights
9.) 1 pair (left and right) Aluminum Headlight Bezels-Used-very nice
10) 1 Fender Mount Side View Mirror (used-bad mirror-mirror backside has 2 dents-chrome is still nice)
11) 2 Round Backup Lenses (used-1 is still shiny-both are cracked but could still be used for a driver)
12) 1 Round Backup Lens (NOS)
13) 1 Ash Tray (used-does not include aluminum front fascia plate)
14) 1 Cigarette Lighter Surround (used-aluminum fascia plate)
15) 1 Dash Mounted Rear View Mirror ( used-mirror showing some stains around edges)
16) 2 Passenger Side Front Grills (used-straight-aluminum is dull)
17) 1 Driver Side Front Grill (used-straight-aluminum is dull)
18) 2 Fin Top Stainless Moldings- (used-nice-I believe this is L/R pair not sure how to identify though)
19) 1 Ignition Key Switch (used- no key)
20) 2 Passenger Side Windshield Wipers (used)
21) 3 Driver Side Windshield Wipers (used)
22) 1 Complete-Set Rear Window Stainless Moldings for 2 door hardtop (used-nice 6 pieces)
23) 4 Fender Spears (used-all have pitting-not terrible though)
24) 1 Dashboard Stainless Molding (used-nice-this fits above glove box door)
25) 2 Interior Rear Panel Stainless Moldings (used-nice-2 door hardtop L/R interchangeable)
26) 1 Trunk Lip Stainless Molding (used-very nice)
27) 1 Passenger Tail Light Surround Stainless Molding (used-nice)
28) 1 Complete Set-Front Windshield Stainless Moldings for 2 door hardtop (used-nice 6 pieces)
29) 1 Glo-Brite Tail Lamp Lens in box (Looks to be NOS)
30) 1 PlyBH Set (L and R) Tail Lamp Lenses (used-nice)
31) 2 Trunk Lid-”Wing Moldings” that fit on top of Trunk Lock (used-pot metal has pitting)
32) 4 Belvedere ¼ Panel Emblems (used-3 have all 3 studs-1 is missing 1 stud)
33) 1 Passenger Side Upper (thick) Fender Stainless Molding (used)
34) 2 Passenger Side Upper (thick) Door Stainless Moldings for 2 Door Hardtop (used)
35) 1 Passenger Side Upper (thick) 1/4 Panel Stainless Moldings for 2 Door Hardtop (used)
36) 2 Passenger Side Lower (thin) Door Stainless Moldings for 2 Door Hardtop (used) Sale Pending
37) 2 Passenger Side Lower (thin) ¼ Panel Stainless Moldings for 2 Door Hardtop (used)
38) 2 Driver Side Upper (thick) Fender Stainless Moldings (used)
39) 1 Driver Side Lower (thin) ¼ Panel Stainless Molding for 2 Door Hardtop (used)
40) 1 Speaker Grill for dashboard (used-nice)
41) 1 Stainless Fin End Cap (used-rough-savable?)
42) 1 Windshield Wiper Switch (used)
43) 1 Terminal block (fits up front by grill under hood-(used)
44) 1 Radio Delete Panel with Stainless Molding on it (used-nice)
45) 1 Horn Ring for power steering car (used-nice chrome)
46) 2 Dashboard Defroster Cups (round-used-nice)
47) 1 Dashboard Defroster Grill (round-used-nice)
48) 1 Heater Control Lever Plate (used- studs intact-needs rechrome)
Edited by furvedere 2014-08-25 11:35 PM
|
|
|
|
Veteran
Posts: 295
Location: Rochester, NY | Here is a complete list of what I still have. Updated 10-3-14
1) 1 Heater Core with Blower Plenum (used)
2) 2 Jiffy Jet Windshield Washer Fluid Bags (fair-used)
3) 2 Mayflower Grill Center Emblems (good-used)
4) 1 Mayflower Grill Center Emblem (very good-used)
5) 3 Push-buttons, (1 Drive, 1 Neutral, 1 Reverse (used-good)
6) 1 radio with antenna (used-not working decent-chrome)
7) 3 Plexiglas speedometer cluster windows/covers (used)
8.)1 pair (left and right) Aluminum Headlight Bezels-Used-very nice
9) 1 Fender Mount Side View Mirror (used-bad mirror-mirror backside has 2 dents-chrome is still nice)
10) 2 Round Backup Lenses (used-1 is still shiny-both are cracked but could still be used for a driver)
11) 1 Round Backup Lens (NOS)
12) Ash Tray (used-does not include aluminum front fascia plate)
13) 1 Cigarette Lighter Surround (used-aluminum fascia plate)
14) 1 Dash Mounted Rear View Mirror ( used-mirror showing some stains around edges)
15) 2 Passenger Side Front Grills (used-straight-aluminum is dull)
16) 1 Driver Side Front Grill (used-straight-aluminum is dull)
17) 2 Fin Top Stainless Moldings- (used-nice-I believe this is L/R pair not sure how to identify though)
18) 1 Ignition Key Switch (used- no key)
19) 2 Passenger Side Windshield Wipers (used)
20) 3 Driver Side Windshield Wipers (used)
21) 1 Complete-Set Rear Window Stainless Moldings for 2 door hardtop (used-nice 6 pieces)
22) 4 Fender Spears (used-all have pitting-not terrible though)
23) 1 Dashboard Stainless Molding (used-nice-this fits above glove box door)
24) 2 Interior Rear Panel Stainless Moldings (used-nice-2 door hardtop L/R interchangeable)
25) 1 Trunk Lip Stainless Molding (used-very nice)
26) 1 Passenger Tail Light Surround Stainless Molding (used-nice)
27) 1 Complete Set-Front Windshield Stainless Moldings for 2 door hardtop (used-nice 6 pieces)
28) 1 Glo-Brite Tail Lamp Lens in box (Looks to be NOS)
29) 1 PlyBH Set (L and R) Tail Lamp Lenses (used-nice)
30) 2 Trunk Lid-”Wing Moldings” that fit on top of Trunk Lock (used-pot metal has pitting)
31) 4 Belvedere ¼ Panel Emblems (used-3 have all 3 studs-1 is missing 1 stud)
32) 1 Passenger Side Upper (thick) Fender Stainless Molding (used)
33) 2 Passenger Side Upper (thick) Door Stainless Moldings for 2 Door Hardtop (used)
34) 1 Passenger Side Upper (thick) 1/4 Panel Stainless Moldings for 2 Door Hardtop (used)
SP) 2 Passenger Side Lower (thin) Door Stainless Moldings for 2 Door Hardtop (used) Sale Pending
35) 2 Passenger Side Lower (thin) ¼ Panel Stainless Moldings for 2 Door Hardtop (used)
36) 2 Driver Side Upper (thick) Fender Stainless Moldings (used)
37) 1 Driver Side Lower (thin) ¼ Panel Stainless Molding for 2 Door Hardtop (used)
38) 1 Speaker Grill for dashboard (used-nice)
39) 1 Stainless Fin End Cap (used-rough-savable?)
40) 1 Windshield Wiper Switch (used)
41) 1 Terminal block (fits up front by grill under hood-(used)
42) 1 Radio Delete Panel with Stainless Molding on it (used-nice)
43) 1 Horn Ring for power steering car (used-nice chrome)
44) 2 Dashboard Defroster Cups (round-used-nice)
45) 1 Dashboard Defroster Grill (round-used-nice)
46) 1 Heater Control Lever Plate (used- studs intact-needs rechrome) |
|
|
|
Veteran
Posts: 149
Location: Iowa | Do you have the front fender spear that sits on top of the front fender? Not sure what is official name is.
Thanks
Edited by SaratogaFan 2014-10-27 9:31 PM
|
|
|
|
Expert 5K+
Posts: 6500
Location: Newark, Texas (Fort Worth) | 22) 4 Fender Spears (used-all have pitting-not terrible though) (for above) |
|
|
|
Veteran
Posts: 149
Location: Iowa | Thanks Marc! I wasn't sure if that meant a side piece or the one I was looking for. I'm new to this.
PM sent to furvedere.
Edited by SaratogaFan 2014-10-29 12:01 PM
|
|
|
|
Elite Veteran
Posts: 836
Location: Layton, Utah | Hi, looking for a drivers window for a 57 Plaza 2 door sedan. DeSoto lives !!! Thanks, Cory |
|
|
|
Veteran
Posts: 295
Location: Rochester, NY | Sold last of the lower door stainless side trim to a great Christine enthusiast and...
SaratogaFan bought the last set of fender spears and last trunk emblem. Thank you!
Note: Cory...I'm sorry, I do not have any window glass at all.
Please send any requests to: trustinchrist@rochester.rr.com
Up to date list below
11-3-14
1) 1 Heater Core with Blower Plenum (used)
2) 2 Jiffy Jet Windshield Washer Fluid Bags (fair-used)
3) 2 Mayflower Grill Center Emblems (good-used)
4) 1 Mayflower Grill Center Emblem (very good-used)
5) 3 Push-buttons, (1 Drive, 1 Neutral, 1 Reverse (used-good)
6) 1 radio with antenna (used-not working decent-chrome)
7) 3 Plexiglas speedometer cluster windows/covers (used)
8) 1 pair (left and right) Aluminum Headlight Bezels-Used-very nice
9) 1 Fender Mount Side View Mirror (used-bad mirror-mirror backside has 2 dents-chrome is still nice)
10) 2 Round Backup Lenses (used-1 is still shiny-both are cracked but could still be used for a driver)
11) 1 Round Backup Lens (NOS)
12) Ash Tray (used-does not include aluminum front fascia plate)
13) 1 Cigarette Lighter Surround (used-aluminum fascia plate)
14) 1 Dash Mounted Rear View Mirror (used-mirror showing some stains around edges)
15) 2 Passenger Side Front Grills (used-straight-aluminum is dull)
16) 1 Driver Side Front Grill (used-straight-aluminum is dull)
17) 2 Fin Top Stainless Moldings- (used-nice-I believe this is L/R pair not sure how to identify though)
18) 1 Ignition Key Switch (used- no key)
19) 2 Passenger Side Windshield Wipers (used)
20) 3 Driver Side Windshield Wipers (used)
21) 1 Complete-Set Rear Window Stainless Moldings for 2 door hardtop (used-nice 6 pieces)
22) 1 Dashboard Stainless Molding (used-nice-this fits above glove box door)
23) 2 Interior Rear Panel Stainless Moldings (used-nice-2 door hardtop L/R interchangeable)
24) 1 Trunk Lip Stainless Molding (used-very nice)
25) 1 Passenger Tail Light Surround Stainless Molding (used-nice)
26) 1 Complete Set-Front Windshield Stainless Moldings for 2 door hardtop (used-nice 6 pieces)
27) 1 Glo-Brite Tail Lamp Lens in box (Looks to be NOS)
28) 1 PlyBH Set (L and R) Tail Lamp Lenses (used-nice)
29) 2 Belvedere ¼ Panel Emblems (used-1 has all 3 studs-1 is missing 1 stud)
30) 1 Passenger Side Upper (thick) Fender Stainless Molding (used)
31) 2 Passenger Side Upper (thick) Door Stainless Moldings for 2 Door Hardtop (used)
32) 1 Passenger Side Upper (thick) 1/4 Panel Stainless Moldings for 2 Door Hardtop (used)
33) 2 Passenger Side Lower (thin) ¼ Panel Stainless Moldings for 2 Door Hardtop (used)
34) 2 Driver Side Upper (thick) Fender Stainless Moldings (used)
35) 1 Driver Side Lower (thin) ¼ Panel Stainless Molding for 2 Door Hardtop (used)
36) 1 Speaker Grill for dashboard (used-nice)
37) 1 Stainless Fin End Cap (used-rough-savable?)
38) 1 Windshield Wiper Switch (used)
39) 1 Terminal block (fits up front by grill under hood-(used)
40) 1 Radio Delete Panel with Stainless Molding on it (used-nice)
41) 1 Horn Ring for power steering car (used-nice chrome)
42) 2 Dashboard Defroster Cups (round-used-nice)
43) 1 Dashboard Defroster Grill (round-used-nice)
44) 1 Heater Control Lever Plate (used- studs intact-needs rechrome)
Edited by furvedere 2014-11-04 1:16 AM
|
|
|