Expert 5K+
Posts: 8443
Location: Perth Australia | I believe that if they have been cast with an optional boss for another stud they are for the matador
I bought a pair of nos ones and one had the 3 bosses and 1 only had 2, the one with the 3 had studs in 2 0f the bosses, but the spacing was wrong for my phoenix, I had to drill out the third boss to accept a stud and grind the other back down to clear the ridge in the panel
Because of the big plate thing on the matador, the ridge in the fender doesnt come into play?
The one in the picture with the bolts close together is for the phoenix/dart line, as I dont have a senior model here, I assume the other 3 are for those
The Matador one would have been rocking horse poo years ago, but because the dart line are more common, I would think the dart ones would be harder to get these days
Cant be to many more nos ones floating around, so if you want these, best snap them up
The modification to fit the matador ones to a dart was a bit of a pain, but not enough to make you not want to do it
One thing is, if you have a matador, then buy these as the dart ones dont have the boss and cant be modified to suit
Edited by ttotired 2015-10-17 8:49 PM
(dodge fender spears.jpg)
Attachments ---------------- dodge fender spears.jpg (158KB - 276 downloads)
|