|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Hello,
As you might have seen in another thread, I have the possibility to reproduce the plastic connectors for Power Window switches through 3D printing. The parts are made of polyamide (PA 2200) and are very accurate, identical to the original ones. If there is enough interest, I will produce them for you.
The price will depend on the quantity of course, and here is what I can propose, based on the cost of production (price without shipping) :
Master switch (4 switches / driver's side)
- 5 to 19 units : $33
- 20 units or more : $17
Single switch (1 switch / passengers)
- 5 to 19 units : $17
- 20 units or more : $9
If you are interested, please let me know in this thread.
Thank you.
(DSC02189.JPG)
(DSC02193.JPG)
(DSC02191.JPG)
Attachments ---------------- DSC02189.JPG (123KB - 197 downloads) DSC02193.JPG (177KB - 185 downloads) DSC02191.JPG (158KB - 187 downloads)
|
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Hi,
I got a few questions so here are some additional information :
- The parts are 3D printed through a method known as Selective Laser Sintering (SLS) : https://en.wikipedia.org/wiki/Selective_laser_sintering
- The material is a polyamide (PA 2200), very well suited for this application
- The prices above are the final price you will pay depending on the total quantity I will produce. In other words : the more we are, the less expensive it will be.
Thanks.
|
|
|
|
Expert 5K+
Posts: 5006
| I'm interested. I have to check my car in storage to see how bad my mechanism is. |
|
|
|
Extreme Veteran
Posts: 594
Location: Melbourne, Australia | I am interested in a full set Vincent Great idea ! Colin |
|
|
|
Expert
Posts: 1737
Location: Hay Lakes, Alberta, Canada | I am interested! |
|
|
|
Expert
Posts: 1906
Location: Ontario, Canada | Good work Vincent. There is a definite need for these. I hope the word gets out to ALL forward look owners that you have these available. The single switch ones will also interchange with 60-64, as well as for some 59 etc. electric door lock switches. I will certainly tell my customers that you have them!
Greg
|
|
|
|
Regular
Posts: 53
| I'd be interested in at least one full set, probably two. |
|
|
|
Expert
Posts: 3480
Location: Montreal, Canada | I would be in for two full sets. Thanks! |
|
|
|
Elite Veteran
Posts: 612
Location: Kingston Springs , TN | I'd be in for a full set.
Mike |
|
|
|
Expert
Posts: 1223
Location: Ramona, CA | What years will these work on? If they fit newer stuff, you might be able to expand the market in other forums?
|
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | LD3 Greg - 2016-09-03 4:32 AM
Good work Vincent. There is a definite need for these. I hope the word gets out to ALL forward look owners that you have these available. The single switch ones will also interchange with 60-64, as well as for some 59 etc. electric door lock switches. I will certainly tell my customers that you have them!
Thanks Greg, your input is important to me.
I also sent you an email about those connectors a few days ago.
NicksGarage - 2016-09-05 6:27 AM
What years will these work on? If they fit newer stuff, you might be able to expand the market in other forums?
AFAIK, those work for '57 - '59 Power Windows setups.
But as Greg pointed out, there might be other applications as well. |
|
|
|
Expert
Posts: 1488
Location: New Castle PA | Put me down for a full set as well. Thank you! |
|
|
|
Elite Veteran
Posts: 943
| I would be interested in several sets.
Garrett |
|
|
|
Expert
Posts: 2289
Location: Eastern Iowa | So, it looks like a C note would cover a full set of 4 pieces, correct?
Shipping should not be all that much as there would not be much weight.
Keep us posted, OK? |
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | OK, here is what I have so far :
christine-lover : 1 full set 58wedge : interested mikes2nd : interested 57plybel : 1 full set miquelonbrad : interested fin junkie : 1 full set (perhaps 2) soiouz : 2 full sets My57Saratoga : 1 full set 57desoto : 1 full set FINS! : several sets (at least 1 set I suppose)
So that's a total of at least 8 confirmed full sets, for the moment being. We're still in the first price range projection, but that's fine. To be able to start the production, I will need a commitment from you, as well as a first payment. I'll send an email to each of you.
Edited by Chrome58 2016-09-06 8:24 AM
|
|
|
|
Expert
Posts: 1223
Location: Ramona, CA | Are they only for 1957-59 models? |
|
|
|
Board Moderator & Exner Expert 10K+
Posts: 13054
Location: Southern Sweden - Sturkö island | It looks the same, but then someone should measure the distances between the connectors on a '60-'62 master switch |
|
|
|
Expert
Posts: 1906
Location: Ontario, Canada | There is a slightly different pattern to the switch pin locations. Same holds true 64 as well.
Greg |
|
|
|
Expert
Posts: 1906
Location: Ontario, Canada | Master switch that is. |
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Update : due to the global interest, we are now in the second price range for the single switch connectors.
So, the price for a full set has now dropped to $60.00 |
|
|
|
Expert
Posts: 2289
Location: Eastern Iowa | Works fer me!!
These along w/a repro harness should cure a lot of PW issues I would think! |
|
|
|
Member
Posts: 16
| I'm in for two sets. Any chance some can reproduce of find a source for the electrical connector you use with this, that grips the pin? That is often in big trouble too . the harness will fix it for sure, but sometimes just a pin is wrecked |
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Hi John,
Thanks for the interest, you'll receive a PM shortly.
As for the electrical connector, I have no source for it, but you might try with Greg Leggat ("LD3 Greg" on this forum).
He does have a source, as he reproduces the complete harnesses.
Edited by Chrome58 2016-09-08 2:20 PM
|
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Update
Allright, I have launched the production of the first batch of parts.
They will be ready by September 15th.
Also, I'm in the process of looking for the right material to reproduce the covers of those connectors.
I'll let you know if I succed in that.
I hope, in the end, to be able to offer a complete set : connectors, covers and screws.
Edited by Chrome58 2016-09-08 2:22 PM
|
|
|
|
Expert ,, George Passed away July 28th 2021, He will be Missed
Posts: 1295
Location: Twin Falls, Idaho | I will definitely take two sets.
Thanks
George
|
|
|
|
Regular
Posts: 53
| Two years ago I purchased some of the terminal ends from Narragansett Reproductions, their website is http://www.narragansettreproductions.com. They don't list any terminal ends on their website and asked you to contact them. They were called power window pin terminals. |
|
|
|
New User
Posts: 1
Location: Beautiful North Idaho | Please put us down for one master and 3 singles.
|
|
|
|
Extreme Veteran
Posts: 322
| I will take 2 sets. Thanks for doing these.
Jim
|
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Update
The first batch of production is almost pre-sold out.
Some of you, whom have declared interest, have not yet answered my private messages.
Please let me know as soon as possible if you confirm your interest and want to buy those sets.
|
|
|
|
Member
Posts: 33
Location: Norway | Put me down for a full set. Thank you! |
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Hi Ole,
At this stage, the orders for the first batch are closed.
I will keep this thread open to prepare for a second batch, but I have yet to see if there is enough interest beyond the first batch.
I have added your name to the second batch list.
Thank you.
Edited by Chrome58 2016-09-12 9:14 AM
|
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Update
The production of the first batch is under way.
They should be done by the beginning of next week.
I have calculated the shipping costs (with tracking) : it'll be $8.00 per shipping - up to 2 full sets - to the US.
I will contact you separately for the shipping, once I have the parts done.
Edited by Chrome58 2016-09-14 8:44 AM
|
|
|
|
Expert
Posts: 2289
Location: Eastern Iowa | Vincent, $$ is on the way today! |
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Update
The first batch of production is done
I will now check each part individually for conformity, and start shipping the sets next week.
(First batch.jpg)
Attachments ---------------- First batch.jpg (142KB - 174 downloads)
|
|
|
|
Expert 5K+
Posts: 5006
| 2nd batch two sets. |
|
|
|
Regular
Posts: 83
| I will definitely take two sets.
Thanks
Michael |
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Thank you for your interest.
I've added both of you on the second batch list. |
|
|
|
Member
Posts: 11
| Please mark me down for a full set.
Any chance you would make the 60-64 model? If you would not want to do that project yourself, would you share your contacts for someone else to do them? Thanks! Joe |
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Hello Joe,
I've added your name for the second batch.
Thanks.
As for the 60-64 model, I'd do it gladly if I had a model to work from. But I don't, at least for the moment being. My contacts are not special, I just drew the connectors on a 3D modeling software and used 3D printers that I can rent at my former engineering school for prototyping. Then I turned to a local 3D printing shop for batch production.
Edited by Chrome58 2016-09-21 8:23 AM
|
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Update
The first batch is being shipped out this week.
I'll probably get the second batch into production before mid-october.
Interchangeability
I have made some research concerning the interchangeability of those parts, using the '55-'58, '59, '60 and '61 parts catalogs. Those parts are known under references 1779276 (master) and 1779268 (single), but only for the '57-'58 cars. Most probably, they were only serviced (and therefore referenced) during those years and they were included with the wiring or the switches after that. Based on the references of the switches and the wiring, I was able to cross-reference some of their use.
I may be missing some applications, but here's what I've been able to gather so far:
Master switch connector
Electric Window Lift
1957 All - 1 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
1958 All - 1 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
1959 All - 1 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
Single switch connector
Electric Window Lift
1957 All - 3 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
1958 All - 3 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
1959 All - 3 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
Electric Door Lock
1958 All - 2 per car - Imperial
1959 All - 2 per car - Imperial
Electric Seat Adjuster
1957 All - 1 per car - Plymouth
1958 All - 1 per car - Plymouth
1959 All - 1 per car - Plymouth
Tailgate Electric Window Lift
1957 Sub. - 1 per car - Plymouth, Dodge, DeSoto, Chrysler
1958 Sub. - 1 per car - Plymouth, Dodge, DeSoto, Chrysler
1959 Sub. - 1 per car - Plymouth, Dodge, DeSoto, Chrysler
Edited by Chrome58 2016-09-29 8:54 AM
|
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | Allright, I'm closing the thread here, and moving it to the "For Sale - PARTS" section of the forum.
http://www.forwardlook.net/forums/forums/thread-view.asp?tid=63383 |
|
|
|
Member
Posts: 40
| Looking for these. Any one know of a source
|
|
|
|
Expert 5K+
Posts: 7207
Location: Victoria, BC, on Vancouver Island, Canada | Jhack68 - 2021-05-09 7:28 PM
Looking for these. Any one know of a source
Did you check the contact information at the top of this thread ?
Otherwise
Contact contact info is powerwindows@orange.fr |
|
|