Need confirmation of 56 Dodge rear fender aerial location
56D500boy
Posted 2017-01-14 11:00 PM (#531383)
Subject: Need confirmation of 56 Dodge rear fender aerial location



Expert 5K+

Posts: 9909
500020002000500100100100100
Location: Lower Mainland BC		I suckered myself into buying some NOS (or repros ?) twin rear fender aerials for my 56 Custom Royal D-500. I am gathering up radio parts - T & C radio locally, knobs from a FL forum member and now the aerials.

The instructions that came with the aerials mention a 1" hole and the distance from the end of the fender as 16". It is not clear whether that is to the edge of the metal eustation or the center of the hole. Could some one with a 56 Custom Royal or equivalent please confirm the 16" is to ???

Related question: 1" hole, drilled vertically or on an angle?

Example aerials (not my car):





(56-Dodge-D-500_Lancer-DV-10_CM_002.jpg)



Attachments
----------------
Attachments 56-Dodge-D-500_Lancer-DV-10_CM_002.jpg (231KB - 185 downloads)
Top of the page Bottom of the page
Gasmanscotty
Posted 2017-01-18 10:51 PM (#531726 - in reply to #531383)
Subject: RE: Need confirmation of 56 Dodge rear fender aerial location



Regular

Posts: 68
2525
Location: Mitchell Nebraska		I can get you those measurements but not until I get home from Scottsdale on Sunday.
Top of the page Bottom of the page
56D500boy
Posted 2017-01-18 11:00 PM (#531727 - in reply to #531726)
Subject: RE: Need confirmation of 56 Dodge rear fender aerial location



Expert 5K+

Posts: 9909
500020002000500100100100100
Location: Lower Mainland BC
Gasmanscotty - 2017-01-18 10:51 PM I can get you those measurements but not until I get home from Scottsdale on Sunday.


Thanks that would be great.

Top of the page Bottom of the page