Dodge 325 Water Pump to Block Gaskets

FINS! Posted 2017-02-23 2:26 PM (#534582) Subject: Dodge 325 Water Pump to Block Gaskets Elite Veteran Posts: 943 I cannot seem to find a source for the gaskets that go between the block and the water pump housing for my 57 Dodge. It is a 325. Anyone have a suggestion for a source? Thanks local2Ed Posted 2017-02-24 12:12 PM (#534631 - in reply to #534582) Subject: RE: Dodge 325 Water Pump to Block Gaskets Extreme Veteran Posts: 580 They're a pretty simple gasket to make. You should be able to trace the outline when you have the part off. I know they're in a full rebuild gasket set but I'm sure you don't want to spend that much money for a few gaskets, that is, if you don't need any more gaskets. Darryl T Posted 2017-02-24 1:02 PM (#534632 - in reply to #534631) Subject: RE: Dodge 325 Water Pump to Block Gaskets Extreme Veteran Posts: 429 Location: McCleary WA Try Olson's Gaskets in Port Orchard WA - 360-871-1207 , www.olsonsgaskets.com, info@olsonsgaskets.com. They have just about anything. elimontfort Posted 2017-03-21 9:11 PM (#536413 - in reply to #534582) Subject: Re: Dodge 325 Water Pump to Block Gaskets Regular Posts: 58 My fel pro engine gasket kit has them in it. Got it from rock auto FINS! Posted 2017-04-03 7:38 PM (#537303 - in reply to #534582) Subject: RE: Dodge 325 Water Pump to Block Gaskets Elite Veteran Posts: 943 Thanks. Olsen's had them. Good to know they are in the Rock Auto kits though. RUSTORICHES Posted 2017-04-21 3:23 PM (#538528 - in reply to #534582) Subject: Re: Dodge 325 Water Pump to Block Gaskets Extreme Veteran Posts: 494 Location: Alberta Thanks for posting the supplier it's a great resource