|
|
Elite Veteran
Posts: 854
| I am Looking for 57 -59 Plymouth or Dodge Convertible Top Folding parts .I have Located some but I am Looking for any others .For my 2 58 Dodge Mayfair Convertibles ,Thanks . | |
| |
Member
Posts: 16
| I am looking for the leading edge chrome /SS trim that moves with roof, wide 3 pieces at front..if ypou find that get in touch. FYI, 57-59 mopar trim all fit, but LWB cars (Chrysler) the whole roof folding part is longer.Found out the hard way | |
| |
Elite Veteran
Posts: 854
| Thanks for the information,are those stainless pieces the same for all the Brands from 57-59? | |
| |
Member
Posts: 16
| I do belive they are, but have obviously never had all in my hands at once; I had a ? year 57, 58? Chrysler roof linkage ,and a wrecked 57 dodge linkage (bent steel links, one missing, and one back arm broken at pivot (common failure,by the way , someone trys to open roof without unhooking it, BANG )--- side by side, some parts the same, some Dodge parts shorter in the roof folding area ; I belive the whole small car roof is a few inches shorter. I was able to rework the chrysler pieces to make the Dodge linkage whole . = measure on one at a car show if you can. I should have ; but width the same (re: the three pieces)--- has to be , as windshields within each year the same .
Had to make one back arm in machine shop from billet , added to rest of what was left.
Someone had taken whole roof off the 57 Dodge convert in a junkyard , car is restored now with good fixed up roof linkage parts from a dodge wrecked top , and some modified Chrysler, all works but no leading edge trim. Another bad problem on these, FYI, ---if left outside is front header rusts out under that trim. Had to make that 100% from scratch on a 300C convert . In your search you may end up with finding that three piece section, let me know..We can help each other. | |
| |
Elite Veteran
Posts: 943
| I don't have any but I can measure the upper trim piece on my Imperial convertible and see if it is in fact the same as other Mopars? I also need any 57-59 Plymouth or Dodge convertible top parts too and the convertible tub area. In case someone has tons of this stuff sitting around | |
|
|