|
|
Veteran
Posts: 169
Location: Cochrane, Alberta | I was hoping to buy a polyurethane suspension bushing kit for my 58 Chrysler; I have used them in the past on Mopar muscle cars I have restored and really liked the results.
I haven't had any luck with my initial internet searches finding them out there; does anyone know if these kits exists for this vintage of cars? |
|
|
|
Expert 5K+
Posts: 6500
Location: Newark, Texas (Fort Worth) | Try pst or http://www.energysuspensionparts.com/?utm_source=bingads&utm_medium...
https://p-s-t.com/
you may need to measurements for them... |
|
|
|
Expert 5K+
Posts: 7400
Location: northern germany | nothing at pst. no pu bushings for 57-61. i fabricated them myself for the uca. 2 piece style. not too difficult and still cheaper than regular bushings. you will have to reuse the old hardware, so another plus, you don't have to press the outer bushing shells out. |
|
|
|
Expert 5K+
Posts: 5006
| the ACdelco bushings are a newer style harness, one bushing you cant get anymore I think.
The ACDelco idler arm bushing was near poly bushing hardnes also.
I don't really know what poly bushings would get you except a bad ride, these bushings are already very thin.
The stabilizer bar bushings I got were newer harder style also, near poly. |
|
|