|
|
Veteran
Posts: 111
Location: Egg Harbor Township, NJ | Merry Christmas and Happy Holidays! There will a production run of 1957-1958 Chrysler/Dodge/Plymouth/Desoto polyurethane upper control arm bushings during the holiday season. I have some free time from my full time job, and will reduce the price from $225 to $190 for this time. Now through the month of January. For those Interested, I will need a set of old bushings and/or outer shells. Please email me at tas9617@gmail.com for those Interested, or PM me. Old bushings or shells can be mailed to Timothy Salter, 1127 Ocean Heights Avenue, Egg Harbor Township, NJ, 08234. Best wishes and happy holidays!
|
|
| |
|
Expert 5K+
Posts: 6500
  
Location: Newark, Texas (Fort Worth) | Hi: Will these be super hard or have some 'squish'? Marc. |
|
| |
|
Veteran
Posts: 111
Location: Egg Harbor Township, NJ | The durometer (hardness/squishyness) is matched to the original bushing material. |
|
| |
|
Veteran
Posts: 111
Location: Egg Harbor Township, NJ | I can change that, but too stiff will cause excess strain on the suspension frame components.
|
|
| |
|
Veteran
Posts: 111
Location: Egg Harbor Township, NJ | Also, the bushings have a lifetime warranty of wear or I replace them free of charge. Have 1000+ miles one mine in a 57 Desoto Firesweep with a 392 hemi in it.
|
|
| |
|
Veteran
Posts: 111
Location: Egg Harbor Township, NJ | If you go back and look in my post history, I looked around for years. Nobody made them, so I decided to go out and make my own with the help of a friend who knows more about these cars then anyone else I have met. Thanks, Jim. 
|
|
| |
57-58 Polyurethane Upper Control Arm Bushings