Posted 2018-05-10 2:37 AM (#563065) Subject: Generator to Alternator conversion on a Poly
Veteran
Posts: 172
Location: Newcastle, NSW AUSTRALIA
Hi All,
I know this has to have been done before I want to convert my 60 Fury from the standard generator to an alternator
as I need a big amp alternator for the 12V AC pump I want to use. I have later 318 alternator brackets they
will work at the water pump mount but the alternator hits the head a poly head must be further forward to an LA motor.
Are there any previous threads on this conversion & the parts used
Posted 2018-05-10 3:44 PM (#563110 - in reply to #563070) Subject: Re: Generator to Alternator conversion on a Poly
Expert 5K+
Posts: 9904
Location: Lower Mainland BC
OzFury - 2018-05-10 4:37 AM Hi Mick
What section is the thread in ? I was hoping to remove that generator mount bloody ugly thing it is but gotta do what ya gotta do
Cheers Gra
I got curious and did a search on "barn find" by "ttotired" and found this:
Posted 2018-05-10 5:40 PM (#563113 - in reply to #563065) Subject: Re: Generator to Alternator conversion on a Poly
Veteran
Posts: 172
Location: Newcastle, NSW AUSTRALIA
Thanks for the Dave I was looking for "my barn find" I thought that would be how most would do the conversion but I want to do away
with the mount on the manifold if I can I'm going to play with it today if I can do it without to much hassle I will if not I'll just do the same
& mod the original mount.