Posted 2018-08-08 4:49 AM (#568048) Subject: oil filter
Member
Posts: 16
hello anybody can advice about oil filter options for 318 poly ...original filter is a purolator p75 -1 so looking for a common found replacement if any one can help ...good on ya...
Posted 2018-08-08 5:39 PM (#568079 - in reply to #568048) Subject: Re: oil filter
Expert 5K+
Posts: 9654
Location: So. Cal
You can get the original filters at NAPA too, a real parts store. I *beleive* that the fitting for the oil filter housing is the same as the early hemi's. If so, you should be able to adapt it to a spin-0n type of filter using an adapter from HotHemiHeads.com. If you call him, he will usually know if it will fit or not.
Posted 2018-08-08 8:19 PM (#568093 - in reply to #568079) Subject: Re: oil filter
Expert
Posts: 3033
Location: N.W. Fla.
Powerflite - 2018-08-08 4:39 PM
You can get the original filters at NAPA too, a real parts store. I *beleive* that the fitting for the oil filter housing is the same as the early hemi's. If so, you should be able to adapt it to a spin-0n type of filter using an adapter from HotHemiHeads.com. If you call him, he will usually know if it will fit or not.
My understanding is an LA oil filter set up will bolt right on if you remove the OEM base.