55/56 Dodge Hubs
Rahhstah
Posted 2018-09-04 1:30 PM (#569578)
Subject: 55/56 Dodge Hubs



Member

Posts: 18

Looking for a set of front hubs from a 55/56 Dodge to swap over onto my 56 Plymouth Belvedere to complete a disc brake conversion...

Thanks for any leads!

Top of the page Bottom of the page
DepsilonD
Posted 2018-09-04 2:17 PM (#569584 - in reply to #569578)
Subject: Re: 55/56 Dodge Hubs



Elite Veteran

Posts: 792
500100100252525
Location: Buena Park, CA
Why won't the Plymouth hubs work?
Top of the page Bottom of the page
Rahhstah
Posted 2018-09-04 4:37 PM (#569594 - in reply to #569578)
Subject: Re: 55/56 Dodge Hubs



Member

Posts: 18

Roger @ AAJ Brakes says the conversion kit doesn't work with the Plymouth hubs - swap to the Dodge ones. Looking for the easiest path forward on the brakes...
Top of the page Bottom of the page
big m
Posted 2018-09-04 6:20 PM (#569601 - in reply to #569578)
Subject: Re: 55/56 Dodge Hubs



Expert 5K+

Posts: 7805
50002000500100100100
Location: Williams California
I sell the hubs with the drums, they are $85 apiece plus shipping. Guaranteed good condition.

---John
Top of the page Bottom of the page
DepsilonD
Posted 2018-09-04 7:21 PM (#569603 - in reply to #569578)
Subject: Re: 55/56 Dodge Hubs



Elite Veteran

Posts: 792
500100100252525
Location: Buena Park, CA
Interesting. If you haven't purchased yet, you can also check out the Rusty Hope & ECI brake conversion.
Top of the page Bottom of the page
GaryS
Posted 2018-09-04 7:31 PM (#569604 - in reply to #569578)
Subject: Re: 55/56 Dodge Hubs



Expert

Posts: 1207
1000100100
Location: Ponder, TX
I wonder what's changed in the AAJ design? I installed his kit on my '56 Plymouth and the only mod I can recall that was not covered by the installation instructions was minor grinding to clear the adapter. I had to use stock Cordoba 15" wheels to clear the calipers, but I had planned to do that anyway.
Top of the page Bottom of the page
Rahhstah
Posted 2018-09-04 9:20 PM (#569607 - in reply to #569604)
Subject: Re: 55/56 Dodge Hubs



Member

Posts: 18

GaryS - 2018-09-04 6:31 PM

I wonder what's changed in the AAJ design? I installed his kit on my '56 Plymouth and the only mod I can recall that was not covered by the installation instructions was minor grinding to clear the adapter.


I'll give him a call and ask again, Thanks!

-Todd
Top of the page Bottom of the page
Rahhstah
Posted 2021-03-17 3:58 PM (#610040 - in reply to #569578)
Subject: Re: 55/56 Dodge Hubs



Member

Posts: 18

Reviving my old wanted thread..since I moved and have misplaced the hubs I got last time..

need the 55/56 Dodge hubs for the 12" AAJ conversion; 11" works with stock hubs.

Any leads appreciated
Top of the page Bottom of the page