PARK CABLE RETAINER "BOLT"
normsclassicradio
Posted 2019-05-06 11:36 AM (#581864)
Subject: PARK CABLE RETAINER "BOLT"



Veteran

Posts: 182
100252525
Location: Kalispell, MT USA
After I got everything cleaned up on my cable shift 727, I fount that the threaded portion of the park cable clamp bolt, or pin, has most of its threads missing. Anyone here have a spare they could part with? 1962-1964 i think, I'll post a photo later. Thanks!

Edited by normsclassicradio 2019-05-06 11:37 AM




(transzn2a.jpg)



Attachments
----------------
Attachments transzn2a.jpg (31KB - 22 downloads)
Top of the page Bottom of the page
Apollo 61
Posted 2019-05-07 11:16 PM (#581923 - in reply to #581864)
Subject: RE: PARK CABLE RETAINER "BOLT"



Extreme Veteran

Posts: 385
100100100252525
I have one off a 63 300. If you could mark exactly which bolt it is?
Top of the page Bottom of the page
normsclassicradio
Posted 2019-05-08 11:21 AM (#581937 - in reply to #581923)
Subject: RE: PARK CABLE RETAINER "BOLT"



Veteran

Posts: 182
100252525
Location: Kalispell, MT USA
Here are a couple of photos. One is the pin with the missing threaded end. The other is it in relation to the housing it goes in,



(20190507_221308.jpg)



(20190507_221343.jpg)



Attachments
----------------
Attachments 20190507_221308.jpg (80KB - 22 downloads)
Attachments 20190507_221343.jpg (114KB - 22 downloads)
Top of the page Bottom of the page
normsclassicradio
Posted 2019-05-16 2:48 PM (#582198 - in reply to #581864)
Subject: RE: PARK CABLE RETAINER "BOLT"



Veteran

Posts: 182
100252525
Location: Kalispell, MT USA
For lack of time here is what I did. I found a shouldered bolt, I think it's a Neon exhaust flange bolt, and cut it down. I then drilled about halfway thru the housing with a size that has a really snug fit. Now I can tighten it until the shoulder locks the cable housing in place. I think it will hold better than the original one.



(20190515_203506.jpg)



(20190515_204309.jpg)



(20190515_204749.jpg)



(20190515_210340.jpg)



Attachments
----------------
Attachments 20190515_203506.jpg (87KB - 19 downloads)
Attachments 20190515_204309.jpg (71KB - 20 downloads)
Attachments 20190515_204749.jpg (67KB - 20 downloads)
Attachments 20190515_210340.jpg (66KB - 20 downloads)
Top of the page Bottom of the page
normsclassicradio
Posted 2019-05-31 4:23 PM (#582764 - in reply to #581864)
Subject: RE: PARK CABLE RETAINER "BOLT"



Veteran

Posts: 182
100252525
Location: Kalispell, MT USA
Final photo of the park cable installed. Not much torque on the nut needed to lock the cable down. Success!




(20190529_204757.jpg)



Attachments
----------------
Attachments 20190529_204757.jpg (62KB - 20 downloads)
Top of the page Bottom of the page