|
|
Extreme Veteran
Posts: 427
Location: Ohio | 8-3/4 Rear axle assembly complete drum to drum
Also includes the leaf springs
Removed from a 1960 Dodge but will interchange with other years & models
Asking $100 - local pickup or could possibly deliver within a certain distance range for a fee
Can send photos if interested |
|
|
|
Expert
Posts: 1740
Location: Alaska | Pretty sure people would like to know what gear ratio, stamped on the lower side of the 3rd member. |
|
|
|
Expert
Posts: 2196
Location: Muskego, WI | Interested. What gear ratio? If you don't know, what was the rest of the drive train in the Dodge? |
|
|
|
Expert 5K+
Posts: 7393
Location: northern germany | I need one desperately. Pretty sure this turns out to be too expensive, but do you ship overseas and what would it cost? |
|
|
|
Expert 5K+
Posts: 9649
Location: So. Cal | Do you need just a part of one, just the third member, or the entire rear end? The best way for you to get these heavy things is to talk to some of the Swedes that have large containers that they import cars & parts with. If you need the third member, I have some I could sell, but it isn't going to be worth it after you pay shipping. |
|
|
|
Expert 5K+
Posts: 7393
Location: northern germany | I need the whole assy, drum to drum. Saved a rust free 59 Fury coupe someone started to part out and sold the axle (for about $65!) to someone before I bought it. I can't easily move it without the axle. |
|
|
|
Expert 5K+
Posts: 9649
Location: So. Cal | The whole thing is impossible to ship through standard methods unless you're willing to separate it up into pieces. Max weight through USPS is 70 lbs, and max length is 60 inches.
Edited by Powerflite 2019-05-21 6:57 PM
|
|
|
|
Extreme Veteran
Posts: 427
Location: Ohio | 58coupe - 2019-05-20 10:46 PM
Pretty sure people would like to know what gear ratio, stamped on the lower side of the 3rd member.
Here is stamping on side of the carrier case. Does this indicate what gear ratio ?
Still need to clean up and inspect for any other stamping / marking
Also trying to positively ID whether the rear axle is an 8-3/4 or 8-1/4
(Rear Axle (2).JPG)
Attachments ---------------- Rear Axle (2).JPG (99KB - 159 downloads)
|
|
|
|
Expert
Posts: 1740
Location: Alaska | There is a smooth face on the bottom of the third member and the ratio is stamped in, not a raised casting. |
|
|
|
Extreme Veteran
Posts: 427
Location: Ohio | After further inspection this rear axle is NOT an 8-3/4
The axle has been confirmed to have casting number 1828488 on the carrier which is an 8-1/4
AGAIN THE AXLE LISTED FOR SALE IN THIS POST IS AN 8-1/4
The leaf springs are SOLD
The rear axle complete drum to drum is Still Available.
In my way special $50 - no shipping pickup or meet in local area for delivery
Edited by Space Trukin Wagon 2019-05-27 9:20 AM
|
|
|
|
Extreme Veteran
Posts: 427
Location: Ohio | Space Trukin Wagon - 2019-05-27 9:18 AM
After further inspection this rear axle is NOT an 8-3/4
The axle has been confirmed to have casting number 1828488 on the carrier which is an 8-1/4
AGAIN THE AXLE LISTED FOR SALE IN THIS POST IS AN 8-1/4
The leaf springs are SOLD
The 8-1/4 rear axle complete drum to drum is Still Available.
Price REDUCED $25.00
- NO shipping pickup or meet in local area for delivery
- Last Chance before it goes to the scrapyard |
|
|