Posted 2019-06-04 10:42 AM (#582920 - in reply to #582910) Subject: Re: 70 to 73 discs on a 61?
Expert
Posts: 3033
Location: N.W. Fla.
You'll probably have to swap the spindles. I used '77 NYer on my '60 Plym. The A Arm mounts were a little closer than OEM, but they work fine on mine. You'll just have to check.
Posted 2019-06-04 11:16 AM (#582923 - in reply to #582910) Subject: RE: 70 to 73 discs on a 61?
Elite Veteran
Posts: 1150
Location: Southern California
apollo61, I have a complete AAJ brakes disc brake kit for your 61, bolt on kit. would be maybe willing to trade for your 70 chrysler 300 disc brakes, I'll need your spindles too.
Posted 2019-06-07 2:14 PM (#583073 - in reply to #582910) Subject: Re: 70 to 73 discs on a 61?
Extreme Veteran
Posts: 371
I was once told by an old friend that my '60 Fury letter designation was most like a C body mopar. When I asked about the disk conversion with knuckles for caliper mounts he told me I would have to change the lower ball joint because the taper diameter is different. I might try it if I ever get a brake and clutch pedal assembly first because without I don't need brakes.
Posted 2019-06-14 2:10 AM (#583412 - in reply to #583073) Subject: Re: 70 to 73 discs on a 61?
Elite Veteran
Posts: 769
Stroller - 2019-06-07 2:14 PM
I was once told by an old friend that my '60 Fury letter designation was most like a C body mopar. When I asked about the disk conversion with knuckles for caliper mounts he told me I would have to change the lower ball joint because the taper diameter is different. I might try it if I ever get a brake and clutch pedal assembly first because without I don't need brakes.
Are these the pedals your looking for? If so I got these from a 61 ply parts car. You have some PMs