|
|
Veteran
Posts: 143
Location: Malmberget, Sweden | I´ve got my card from FCA and it´s sold Sellman Automobile Co in Las Vegas
It´s hard to se but you guys maybe can help me.
(pic2.jpg)
(Ibm2.jpg)
Attachments ---------------- pic2.jpg (169KB - 260 downloads) Ibm2.jpg (206KB - 249 downloads)
|
|
|
|
Veteran
Posts: 143
Location: Malmberget, Sweden | In the Swedish car register the car has 400 HP, It´s a long ram intake mounted in the car and not the 400HP short ram intake . If it would be a real 400HP car where on the IBM card should it be printed?
|
|
|
|
Veteran
Posts: 256
Location: Chicago | There is no option code for the 400 HP. Your data plate shows D-1 Accessory Package "A", N-1 Air Conditioning, T-8 Golden Touch Tuner radio with rear speaker, and V-1 Tinted Glass |
|
|
|
Veteran
Posts: 143
Location: Malmberget, Sweden | D-1 Accessory Package "A" what will that be, could that include 6 way power seat? |
|
|
|
Veteran
Posts: 256
Location: Chicago | No, the power seat is a separate option. I have never seen power seat coded on the data plate but it is there on the IBM card - the 3 punched in Power Equipment for code 293.
Accessory package "A" was door edge protectors, vanity mirror, and license plate frame (rear). |
|
|
|
Veteran
Posts: 143
Location: Malmberget, Sweden | It’s hard to read the IBM card. Anybody has a better clear pic of a 1961 IBM card?
|
|
|
|
Veteran
Posts: 143
Location: Malmberget, Sweden | R41HP - 2019-08-21 11:47 AM
No, the power seat is a separate option. I have never seen power seat coded on the data plate but it is there on the IBM card - the 3 punched in Power Equipment for code 293.
Accessory package "A" was door edge protectors, vanity mirror, and license plate frame (rear).
Thank you for the information. The car have door edge protectors and license plate frame the vanity mirror were should i find that? |
|
|
|
Board Moderator & Exner Expert 10K+
Posts: 13049
Location: Southern Sweden - Sturkö island | The Vanity mirror was normally mounted on the right sun visor. If it's gone, you should see some impressions from the clips, eventually small rust spots…. |
|
|
|
Veteran
Posts: 256
Location: Chicago | matt - 2019-08-21 2:31 PM
It’s hard to read the IBM card. Anybody has a better clear pic of a 1961 IBM card?
Chrysler 300 Club International has them, but I do not know if the one for your car will be clearer. You can get a free copy and decode if you join the club. The ones I received a long time ago for my 300-Gs are not any clearer than yours, but there is a different guy doing them now and printing them out a different way. I saw some for a couple 300-Fs recently and they were much better. |
|
|
|
Board Moderator & Exner Expert 10K+
Posts: 13049
Location: Southern Sweden - Sturkö island | Send the scan to me via email Matt...... |
|
|
|
Veteran
Posts: 143
Location: Malmberget, Sweden | wizard - 2019-08-22 12:04 PM
Send the scan to me via email Matt......
Did you get it Sven?
I was in my summer cottage when i sent it and is not always it arrives at the receiver |
|
|
|
Board Moderator & Exner Expert 10K+
Posts: 13049
Location: Southern Sweden - Sturkö island | Still nothing Matt... |
|
|