|
|
Elite Veteran
Posts: 689
Location: Winston Salem, N.C. | hi
Need an air filter unit for a 318" engine. Experts here say the unit was used in all divisions of the Chrysler Corp. 1959-1967.
reply here or phone 336-749-5922 and leave message.
thank you for your time.
I'll attach a picture of what I need.
thanks
jerry whitfield
Winston salem NC
(1958 plymouth correct air filter .png)
Attachments ---------------- 1958 plymouth correct air filter .png (161KB - 114 downloads)
|
|
|
|
Expert 5K+
Posts: 9904
Location: Lower Mainland BC | .
Jerry: You might want so tell them which carburetor, i.e. 2 bbl or 4 bbl. Air cleaner throat size is probably different (??)
In both cases below, you can see the 2 bbl "clamp" turn screw loop just under the passenger side edge of the filter housing. 4 bbls are probably different.
Edited by 56D500boy 2019-10-25 9:11 PM
(58PlymouthWideMouthAirCleaner.jpg)
(58Plymouth318AirCleaner_1.jpg)
Attachments ---------------- 58PlymouthWideMouthAirCleaner.jpg (64KB - 110 downloads) 58Plymouth318AirCleaner_1.jpg (70KB - 130 downloads)
|
|
|
|
Elite Veteran
Posts: 689
Location: Winston Salem, N.C. | Hi
my 318" has a 2 barrel carb. thanks Jerry |
|
|