Motor Mounts question 1955 Dodge or any three point mount

friedbanana Posted 2019-11-20 12:11 PM (#590444) Subject: Motor Mounts question 1955 Dodge or any three point mount Member Posts: 11 Location: Gualala, CA I am putting together a long term project and seem to have forgotten the correct orientation of the rear motor mounts. These are the stock rear/bell housing mounts. I purchased new mounts but not sure of exactly how they should be mounted, ie which bushing goes where and how much they should be torqued. I have the original shop manual but there are no references or photos. I have the 270 poly but I believe this style mount was used on many different cars and motors from the era. If someone has a photo or a diagram that would be great! Thanks 56D500boy Posted 2019-11-20 4:58 PM (#590456 - in reply to #590444) Subject: RE: Motor Mounts question 1955 Dodge or any three point mount Expert 5K+ Posts: 9904 Location: Lower Mainland BC Anything here help? (55DodgeAndPlymouthRearEngineMountDiagram.jpg) (55DodgeAndPlymouthRearEngineMountPNs.jpg) Attachments ---------------- 55DodgeAndPlymouthRearEngineMountDiagram.jpg (98KB - 139 downloads) 55DodgeAndPlymouthRearEngineMountPNs.jpg (136KB - 149 downloads) friedbanana Posted 2019-11-22 2:19 AM (#590526 - in reply to #590444) Subject: Re: Motor Mounts question 1955 Dodge or any three point mount Member Posts: 11 Location: Gualala, CA That definitely helps, I don’t know why I had such a hard time finding something like that, or even a random picture. It makes sense from what I remember now. Good news I figured out a problem, bad news that I had them installed incorrectly. It will teach me to take better notes next time. Thanks