1960 Chrysler underhood warning sticker placement
dplotkin
Posted 2020-11-11 7:01 PM (#605549)
Subject: 1960 Chrysler underhood warning sticker placement


Veteran

Posts: 153
1002525
Location: Massachusetts
I would like to confirm correct underhood warning sticker placement. I have beautiful stickers from Sven together with a photo of where they go - and yet when I look at myriads of photos of other 300 F I see no conformity. My car has the gasket on the radiator support where most Mopar stickers go. Sven shows them on the grill surround support. Anyone have a factory photo or can otherwise confirm placement?

Dan
Top of the page Bottom of the page
NicksGarage
Posted 2020-11-12 1:33 AM (#605557 - in reply to #605549)
Subject: Re: 1960 Chrysler underhood warning sticker placement



Expert

Posts: 1223
1000100100
Location: Ramona, CA
I have an original 300F and an original '60 New Yorker. The labels are gone from the F but my wagon has them, and even an extra one that they dropped and stuck down low.




(coolant_labels.jpg)



Attachments
----------------
Attachments coolant_labels.jpg (232KB - 196 downloads)
Top of the page Bottom of the page
NicksGarage
Posted 2020-11-12 1:59 AM (#605559 - in reply to #605549)
Subject: Re: 1960 Chrysler underhood warning sticker placement



Expert

Posts: 1223
1000100100
Location: Ramona, CA
Here are a few more. Hard to find a picture of as it's not an angle most people take. Looks like non-A/C cars only get one. My wagon has dual A/C.




(underhood_label_01.jpg)



(underhood_label_02.jpg)



(underhood_label_03.jpg)



(underhood_label_04.jpg)



Attachments
----------------
Attachments underhood_label_01.jpg (110KB - 195 downloads)
Attachments underhood_label_02.jpg (97KB - 198 downloads)
Attachments underhood_label_03.jpg (140KB - 209 downloads)
Attachments underhood_label_04.jpg (139KB - 195 downloads)
Top of the page Bottom of the page
dplotkin
Posted 2020-11-12 8:45 AM (#605563 - in reply to #605549)
Subject: RE: 1960 Chrysler underhood warning sticker placement


Veteran

Posts: 153
1002525
Location: Massachusetts
Excellent! thanks to all, I should have it done today and will send photos. Sven has nice stickers!

Dan
Top of the page Bottom of the page
dplotkin
Posted 2020-11-12 12:17 PM (#605574 - in reply to #605549)
Subject: RE: 1960 Chrysler underhood warning sticker placement


Veteran

Posts: 153
1002525
Location: Massachusetts
Thanks for the help everyone. Here are the mounted stickers from Sven, very high quality and easy to apply. I made the middle one slightly crooked as I doubt the perfect symmetry from the factory. I was unsure of the A pillar service sticker, likely was put all over the place so I picked a spot.

Now she is all dressed up with nowhere to go.

Be well everyone!

Dan



(ABC1.jpg)



(ABC2.jpg)



(ABC3.jpg)



Attachments
----------------
Attachments ABC1.jpg (116KB - 201 downloads)
Attachments ABC2.jpg (71KB - 203 downloads)
Attachments ABC3.jpg (109KB - 198 downloads)
Top of the page Bottom of the page