Looking for a Powerflite shifter with buttons and face plate for a '57-'58 Dodge. Cable not needed. Cash or can trade good Torqueflite shifter. I have already checked with Big M.
Posted 2021-11-08 8:32 PM (#616656 - in reply to #616119) Subject: Re: wanted: Powerflite shifter for 57-58 Dodge
Extreme Veteran
Posts: 429
Location: McCleary WA
I now have a NOS shifter and Low button coming. The other 3 are the same as for a Torqueflite and I have them. I could still use a very nice cover plate.
Posted 2021-12-18 7:53 PM (#617766 - in reply to #617763) Subject: Re: wanted: Powerflite shifter for 57-58 Dodge
Extreme Veteran
Posts: 429
Location: McCleary WA
56D500boy - 2021-12-18 4:18 PM
Darryl T - 2021-12-18 12:58 PM
Still need a good Powerflite shifter trim plate. Anyone???
So the four button version of this? (below)
I think the PN for that is 1698 250 (I searched Hiltop, Len Dawson and Grease Monkey (and eBay) and came up dry)
Maybe you can get Dave McK (440fury) to 3D print you a 4 hole plate. He made his own blanking plate that way:
Yes, with the bottom button horizontal. I will look into 3D printing one. I have a NOS plate but it has damage ("popping" of the pot metal). We are having a new bottom button printed that says "PARK" instead of "LOW". I intend to post more on how we are using this to shift the modern NAG1 trans when it is done.
Thanks.