Posted 2022-07-25 10:47 PM (#623192) Subject: Wanted: Single Electric Window Switch for 55-56 Mopar
Exner Expert 10K+
Posts: 10351 Location: Lower Mainland BC
.
Not for me but for a fellow 56 Dodge owner (Dels56). His 56 Lancer's OE switch is Fubar and he would like to find a workable one. Either 100% working or fixable. He has the OE bezel and the switch "knob" but needs the single three wire switch. The OE part number is 1622 373 and the switch was also used on four door 55-56 Mopar in the front and rear passenger locations.
With the bezel the PN is 1622 419. That would work too.
Posted 2022-07-26 10:12 AM (#623200 - in reply to #623192) Subject: RE: Wanted: Single Electric Window Switch for 55-56 Mopar
Exner Expert 10K+
Posts: 10351 Location: Lower Mainland BC
.
Apparently the 1622 273 switch (and the 1622 419 for the 55-56 Plymouths) were also used as the switch for the two way (fore and aft) seat adjusters so that might help Del find a good used one (??). Maybe Big M?
Posted 2022-07-26 11:16 AM (#623204 - in reply to #623192) Subject: Re: Wanted: Single Electric Window Switch for 55-56 Mopar
Exner Expert 10K+
Posts: 10063 Location: So. Cal
The '48-'53 GM & Packard window switches are extremely similar, the only obvious difference being the outer bezel. If it were me, I would purchase one of those and see if I could adapt it to the Dodge bezel.
Posted 2022-07-26 2:27 PM (#623216 - in reply to #623204) Subject: Re: Wanted: Single Electric Window Switch for 55-56 Mopar
Exner Expert 10K+
Posts: 10351 Location: Lower Mainland BC
Powerflite - 2022-07-26 8:16 AM
The '48-'53 GM & Packard window switches are extremely similar, the only obvious difference being the outer bezel. If it were me, I would purchase one of those and see if I could adapt it to the Dodge bezel.
Thanks Nathan. I will let Del know.
I think that he would still be up for a used or fixable used one if anyone had one kicking loose.
Wanted: Single Electric Window Switch for 55-56 Mopar
