Posted 2022-08-11 9:10 PM (#623509 - in reply to #623507) Subject: Re: 325in dodge 3 groove lower pulley interchange?
Expert 5K+
Posts: 9681
Location: So. Cal
Depends on if you have the dampener or not. I recommend that you use one regardless. If you choose to use a dampener from a 340, and mark it appropriately, then you could use more readily available pulleys from later years.
Posted 2022-08-17 1:13 PM (#623591 - in reply to #623507) Subject: Re: 325in dodge 3 groove lower pulley interchange?
Elite Veteran
Posts: 888
Location: Peoples Republic of Oregon
Our usual solution to most pulley related issues is to use a new LA dampener (rebroached keyway) and post-62 sheaves. It is not difficult to
trim off one or more un-needed grooves or trim to match the w/p sheave. Sometimes a spacer behind either top or bottom is needed for alignment.