Expert 5K+
Posts: 9924
Location: Lower Mainland BC | Powerflite - 2022-11-15 8:44 AM
The poly cam will work in a D500, the only difference is the lobe profile. Just regrind it to a more aggressive profile, use adjustable rockers, and you're good to go.
Somebody has suggested to me tha, because of the discolouration on the cam bearings, there is a possibility that that cam is NOT be NOS but instead a *USED* cam that was put in the
NOS box when it was replaced and then put back on the shelf and forgotten. When it was discovered (again), the finder *MIGHT* have assumed that it was NOS.
But that is just speculation.
Edited by 56D500boy 2022-11-17 3:09 AM
|