|
|
Member
Posts: 11
| I've been looking for the Driver's quarter panel lower trim. 1957 Dodge Coronet 2-Door Hardtop. Last part we need for our restoration.
I believe the part number is 1707774 or 1707775.
Thank you,
Rob |
|
|
|
Expert 5K+
Posts: 9922
Location: Lower Mainland BC | legend57 - 2024-04-09 12:33 PM
I've been looking for the Driver's quarter panel lower trim. 1957 Dodge Coronet 2-Door Hardtop. Last part we need for our restoration.
I believe the part number is 1707774 or 1707775.
Item 6 in the parts diagram for the hardtops and 2 dr sedans, etc. below.
1707 775 = left side
1707 774 = right side
I checked eBay for an NOS 1707775 but nothing.
Edited by 56D500boy 2024-04-09 5:25 PM
(57DodgeSideTrimPNs_2.jpg)
Attachments ---------------- 57DodgeSideTrimPNs_2.jpg (232KB - 22 downloads)
|
|
|
|
Expert
Posts: 1495
Location: Lordstown, Ohio | I have a decent set of used ones needing some ding removal and buffing
pm me |
|
|
|
Expert
Posts: 1789
Location: calif | what is length of the piece u need?
rounded, or more flat? |
|
|
|
Member
Posts: 11
| tailfins - 2024-04-09 5:38 PM
what is length of the piece u need?
rounded, or more flat?
I don't know the length. It runs from the door to the lower tail light. See attached pic. The shape is somewhat triangular in cross section.
(Dodge Trim.JPG)
Attachments ---------------- Dodge Trim.JPG (37KB - 19 downloads)
|
|
|
|
Expert 5K+
Posts: 7809
Location: Williams California | I have that piece, but it has a few dings that need to be repaired.
---John |
|
|
|
Member
Posts: 11
| Thanks, John.
I thought of going to you first, but I'd heard that our builder checked with you already. Anyway, we found a set and they're on the way.
We do still need a set of the front fin moldings. See attached image. Let us know if you have any. Thank you, Sir.
(Front Fin Molding.JPG)
Attachments ---------------- Front Fin Molding.JPG (18KB - 8 downloads)
|
|
|