Posted 2024-10-28 10:20 AM (#637549) Subject: 1956 Imperial / New Yorker Water Pump rebuild
New User
Posts: 2
Rebuilding water pump on a 56 New Yorker and have a request for a picture of the "water thrower" circled in red on the following diagram? Did not see any such item when pressing out the old shaft. Are they available for purchase? Thanks for any information.
Posted 2024-10-28 2:01 PM (#637553 - in reply to #637549) Subject: RE: 1956 Imperial / New Yorker Water Pump rebuild
Exner Expert 10K+
Posts: 10836 Location: Lower Mainland BC
.
In the 1955-58 Mopar parts book, that item is shown in some water pump parts diagrams as a "thrower" and that its part number will be found in
Section 7-45-7.
So hot on the trail, I go looking for Section 7-45-7. This is what I found:
(Nothing - so maybe they dropped it as a needed part (?))
Posted 2024-10-28 7:50 PM (#637557 - in reply to #637549) Subject: Re: 1956 Imperial / New Yorker Water Pump rebuild
New User
Posts: 2
Thanks 56D500boy for the information. Wonder if that was more like an o-ring that slipped down on the shaft where the grove is located near the bearing. Appreciate the help.
1956 Imperial / New Yorker Water Pump rebuild
