The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Throttle / Kick down linkage
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Transmission and Rear AxleMessage format
 
haspe
Posted 2015-09-21 5:36 PM (#490226)
Subject: Throttle / Kick down linkage


Veteran

Posts: 113
100
Location: Washington State, the wet side		I am converting my -60 DeSoto cast iron transmission to a -62 727 trans. Just realized that the linkage is not the same and assume that I would have to locate a -62 throttle bell-crank match up to the later trans. Does anyone have any pics of a 62 linkage set up and would it bolt up at the same location on the firewall? I have both the -60 and -62 linkage that mounts to the trans but only the -60 bell-crank that mounts to the firewall
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)