The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

power window switch connctor
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Electrical, Battery and ChargingMessage format
 
stellarrestorations
Posted 2012-06-18 3:02 PM (#326086)
Subject: power window switch connctor



Veteran

Posts: 194
100252525
Location: McPherson, KS

I need one connector that connects the wiring loom to the power window switch for a single switch.  If I read the parts book right, the part # is 1779268 and is common across all the divisions for '57 and '58.

Maybe for '59 too, but I didn't look that part of the parts manual up.





(a.jpg)



(b.jpg)



(c.jpg)



Attachments
----------------
Attachments a.jpg (169KB - 188 downloads)
Attachments b.jpg (160KB - 138 downloads)
Attachments c.jpg (159KB - 130 downloads)
Top of the page Bottom of the page
1956DeS
Posted 2012-06-18 10:29 PM (#326136 - in reply to #326086)
Subject: Re: power window switch connctor


Elite Veteran

Posts: 774
5001001002525
Location: Atlanta GA USA		This thread may offer some help:

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=32096&...

click for thread
Top of the page Bottom of the page
sermey
Posted 2012-06-19 2:40 PM (#326205 - in reply to #326086)
Subject: RE: power window switch connctor


Expert

Posts: 1208
1000100100
Location: SWITZERLAND

Do it simply as shown here in this thread:

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=23691&start=55



Edited by sermey 2012-06-19 2:47 PM
Top of the page Bottom of the page
Chrome58
Posted 2012-06-20 2:16 AM (#326279 - in reply to #326086)
Subject: Re: power window switch connctor



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels		Nice solution, Serge !
I'm also missing two single switch connectors, so I think I'll go your route.
Top of the page Bottom of the page
sermey
Posted 2012-06-20 4:13 AM (#326288 - in reply to #326279)
Subject: Re: power window switch connctor


Expert

Posts: 1208
1000100100
Location: SWITZERLAND

Small advice: don't crimp the wires - solder! A high tear-resistant and a low electric-resistant are important for the power windows. I just have added some pictures for you in the mentioned thread for illustrate. 

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=23691&start=153

Without a connector, in my case (see last Pic) I would solder the wires directly around the pins of the switch for leaving flat to the left, the main connectors being then the external (soldered) round crimp-connectors. - SERGE -



Edited by sermey 2012-06-20 6:10 AM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)