The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Source For 57 Coronet Side and Fin Molding Clips?
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
AceS
Posted 2023-11-29 1:40 PM (#632922)
Subject: Source For 57 Coronet Side and Fin Molding Clips?



Veteran

Posts: 281
100100252525
Location: WA/USA		Does anyone know if there is a good full kit available out there?

Subject car is a 57 Coronet Club Coupe.

Thanks.
Top of the page Bottom of the page
Darryl T
Posted 2023-11-30 1:55 PM (#632929 - in reply to #632922)
Subject: RE: Source For 57 Coronet Side and Fin Molding Clips?



Extreme Veteran

Posts: 428
10010010010025
Location: McCleary WA		I couldn't find complete kits but was able to get the correct clips by size from a variety of sources such as Fasteners Plus, Clips and Fasteners, Midwest Musclecar Specialties, and Altha Fastener. Check Ebay too. Good luck.
Top of the page Bottom of the page
AceS
Posted 2023-12-01 12:54 AM (#632936 - in reply to #632929)
Subject: RE: Source For 57 Coronet Side and Fin Molding Clips?



Veteran

Posts: 281
100100252525
Location: WA/USA		Thanks for the leads Darryl.
Top of the page Bottom of the page
22mafeja
Posted 2023-12-02 1:22 AM (#632946 - in reply to #632922)
Subject: RE: Source For 57 Coronet Side and Fin Molding Clips?


Elite Veteran

Posts: 653
5001002525
Location: Finland		If you get tired of waiting and searching it is also possible to make them by yourself.
I had not one good clip for my Coronet 57 so I made every one of 1,5mm stainless and 4,2mm universal screws and speed nuts.
If you use these you have an extra molding line adjustment margin. A couple of nuts on both sides were not fun to attach... my arms were almost too short...
And of course you have to take off the interior panels to get to the nuts. It took me a couple of days to make 50 clips.
I made 1m strips and drilled and "screwed" and cut off the heads and welded and then I cut the strip into pieces. This went pretty fast.

Edited by 22mafeja 2023-12-02 1:27 AM




(dodge listclips verktyg.jpg)



Attachments
----------------
Attachments dodge listclips verktyg.jpg (211KB - 32 downloads)
Top of the page Bottom of the page
AceS
Posted 2023-12-02 11:52 AM (#632948 - in reply to #632922)
Subject: Re: Source For 57 Coronet Side and Fin Molding Clips?



Veteran

Posts: 281
100100252525
Location: WA/USA		Thanks, yes was actually going to make them at first..... but I have more projects than time! Looks like you came up with a great way to do it should I still go that way.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)