Viewing a thread - Water Outlets

You are logged in as a guest. ( logon | register )

Water Outlets Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General Discussion	Message format

FINS!

Posted 2017-02-10 12:47 AM (#533661)
Subject: Water Outlets

Elite Veteran

Posts: 943
500

The water outlet/ filler neck on my '57 Dodge wagon is rusted out I know these are the same on other makes, have they ever been reproduced? Thanks

Andy1974

Posted 2017-02-16 1:23 PM (#534158 - in reply to #533661)
Subject: RE: Water Outlets

Regular

Posts: 90

Location: Germany

Do you mean the thermostat housings?

56D500boy

Posted 2017-02-16 2:26 PM (#534163 - in reply to #533661)
Subject: RE: Water Outlets

Expert 5K+

Posts: 9900
5000

Location: Lower Mainland BC

FINS! - 2017-02-10 12:47 AM
The water outlet/ filler neck on my '57 Dodge wagon is rusted out I know these are the same on other makes, have they ever been reproduced? Thanks

I asked the same question a while back: http://www.forwardlook.net/forums/forums/thread-view.asp?tid=63600&...

and all I got was this:

CLICK HERE

Good luck

Edited by 56D500boy 2017-02-16 2:26 PM

b5rt

Posted 2017-02-16 2:44 PM (#534164 - in reply to #533661)
Subject: Re: Water Outlets

Expert

Posts: 2519
2000

Location: central Illinois

Is this what you're looking for? http://www.ebay.com/itm/1957-66-Chrysler-Dodge-Plymouth-V8-with-AC-...

57chizler

Posted 2017-02-17 1:35 PM (#534221 - in reply to #533661)
Subject: RE: Water Outlets

Expert

Posts: 3776
2000

Location: NorCal

The original angled '57 thermostat housing is stamped steel, the later versions are cast iron. Neither of the angled housings are being repopped, the only ones being repopped are the much later short straight housings which would probably work with the right hose.